City of Osage Beach, MO
Camden County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
[R.O. 2006 §500.080; Code 1975 §40.010; CC 1985 §7-76; Ord. No. 40.010, 3-26-1985; Ord. No. 91.39 §1, 12-19-1991; Ord. No. 97.07 §1, 2-20-1997; Ord. No. 01.55 §1, 12-20-2001; Ord. No. 06.27 §1, 6-15-2006; Ord. No. 13.84 §1, 12-19-2013]
The International Property Maintenance Code, 2012 Edition, is hereby adopted as the Existing Structures Code of the City for the control of buildings and structures within the City. Each and all of the regulations, provisions, penalties, conditions and terms of the code are hereby adopted by reference and made a part of this Article as if fully set out in this Article, with the additions, insertions, deletions and changes, if any, prescribed in Section 500.090. One (1) copy of the International Property Maintenance Code, 2012 Edition, is on file in the office of the City Clerk.
[R.O. 2006 §500.090; CC 1985 §7-77; Ord. No. 91.39 §2, 12-19-1991; Ord. No. 97.07 §2, 2-20-1997; Ord. No. 01.55 §2, 12-20-2001; Ord. No. 06.27 §2, 6-15-2006; Ord. No. 07.60 §1, 12-6-2007; Ord. No. 13.84; §2, 12-19-2013]
The 2012 International Property Maintenance Code is amended in the following respects:
Section PM 101.1 is hereby amended to read as follows:
Section 101.1. This code shall be known as the "Property Maintenance Code of the City of Osage Beach, Missouri," hereinafter referred to as the "Property Maintenance Code" or "this code."
Section 103.5: delete in its entirety.
Section 302.4: insert the words "twelve (12) inches."
Section 304.14. During the period from May 1 to October 1, every door, window and other outside opening required for ventilation of habitable rooms, food preparation areas or any areas where products to be included or utilized in food for human consumption are processed, manufactured, packaged or stored shall be supplied with approved tightly fitting screens of a minimum of 16 mesh per inch (16 mesh per 25 mm), and every screen door used for insect control shall have a self-closing device in good working condition.
Section 602.3. Heat Supply. Every owner and operator of any building who rents, leases or lets one or more dwelling units or sleeping units on terms, either expressed or implied, to furnish heat to the occupants thereof shall supply heat during the period from October 1 to May 1 to maintain a minimum temperature of 68°F (20°C) in all habitable rooms, bathrooms and toilet rooms.
Exceptions:
1.
When the outdoor temperature is below the winter outdoor design temperature for the locality, maintenance of the minimum room temperature shall not be required, provided that the heating system is operating at its full design capacity. The winter outdoor design temperature for the locality shall be as indicated in Appendix D of the International Plumbing Code.
2.
In areas where the average monthly temperature is above 30°F (-1°C), a minimum temperature of 65°F (18°C) shall be maintained.
Section 602.4. Occupiable work spaces. Indoor occupiable work spaces shall be supplied with heat during the period from October 1 to May 1 to maintain a minimum temperature of 65°F (18°C) during the period the spaces are occupied.
Exceptions:
1.
Processing, storage and operating areas that required cooling or special temperature conditions.
2.
Areas in which persons are primarily engaged in vigorous physical activity.
[R.O. 2006 §500.100]
Any person violating any of the provisions of this Article or the National Property Maintenance Code adopted in this Article shall be deemed guilty of an ordinance violation and upon conviction thereof shall be fined in an amount not exceeding five hundred dollars ($500.00) or be imprisoned in the City or County Jail for a period of not exceeding ninety (90) days, or both such fine and imprisonment. Each day such violation is committed or permitted to continue shall constitute a separate offense and shall be punishable as such hereunder.