[CC 1990 §20-105; Ord. No. 341, 5-9-2001]
A. 
The subdivider shall submit to the Director of Public Works the following plans, profiles and cross sections, drawn to a horizontal scale of one (1) inch to one hundred (100) feet or less and a vertical scale of one (1) inch to twenty (20) feet or less, and specifications for the construction of the improvements for the subdivision as required in this regulation. All elevations shall be referred to mean sea level.
1. 
The plan and profile of each street with tentative grades and street intersection elevations.
2. 
The cross sections of proposed streets showing the width of roadways, present and proposed grade lines, and location and size of utility mains. The cross sections shall be taken and platted at intervals of not more than one hundred (100) feet along the centerline, unless otherwise required by the Director of Public Works, and shall extend out to the sides to that point where the proposed grade intersects the existing grade. In no case shall these cross sections be extended less than the full width of the right-of-way.
3. 
The plan and profile of proposed sanitary sewers and storm water sewers with grades and pipe sizes indicated, and a plan of the proposed water distribution system showing pipe sizes and location of valves and fire hydrants.
4. 
Specifications for the required improvements. Standard specifications approved by the Director of Public Works may be used.