As used in this article, the following terms shall have the meanings indicated:
MANUFACTURED HOME
A structure which complies with the standards set forth in 24 CFR Part 3280, designed to be used as a dwelling with or without a permanent foundation when connected to the required utilities, and includes the plumbing, heating, air-conditioning and electrical systems contained therein.
[Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. II)]
No manufactured home may be placed in the City of Reedsburg without first obtaining from the Building Inspector a building permit. Said permit shall cover all on-site activities, including, where applicable, the following: foundation; electrical hook-up; connection to water and sewer systems; installation of exit platforms and stairs; and any additions or garages that will be constructed on site. Fees for the permit shall be according to the current City Fee Schedule on file in the City’s offices or available on the City’s website.
All on-site construction related activities pertaining to a manufactured home for which a building permit is issued shall conform to the applicable requirements of Chs. SPS 320-325, Wis. Adm. Code.
Every manufactured home for which a permit is issued shall have at least one exit door which has a system of landings and stairs which meet the requirements of § SPS 321.04, Wis. Adm. Code. Every other exterior door, whether one or more, shall have, at a minimum, a landing which complies with § SPS 321.04, Wis. Adm. Code.
No manufactured home may be occupied until the Building Inspector is satisfied that the requirements of this article have been met and has issued a certificate of occupancy stating such.
No alteration or modification may be made to a manufactured home or its systems which is not in compliance with the standards set forth in 24 CFR Part 3280.
Nothing in this article shall be construed to imply that the local Building Inspector is to inspect any part of the manufactured home or its mechanical systems which was installed by the manufacturer and in place prior to placement of the structure at the site.