[Amended 12-22-2003; 12-20-2004; 11-20-2006; 11-16-2009]
For the purpose of this chapter, the Town of
Dagsboro is hereby divided into zoning districts as follows:
|
Symbols
|
Name
|
|---|---|
|
R
|
Residential
|
|
MR
|
Medium-Density Residential
|
|
TC
|
Town Center
|
|
C
|
Commercial
|
|
HC
|
Highway Commercial
|
|
LI
|
Light Industry
|
|
RPC
|
Residential Planned Community
|
|
CRD
|
Cluster Residential
|
The boundaries of these zoning districts are
established on the map entitled "Zoning Map of the Town of Dagsboro,"
dated September 1994, which accompanies and is hereby made a part
of this chapter.[1]
[1]
Editor's Note: The Zoning Map is on file in
the Town office.
Zoning district boundary lines are intended
to follow the center lines of streets and streams, and lot or property
lines as they exist at the time of enactment of this chapter unless
otherwise indicated by dimensions on the Zoning Map. Any dimensions
shown shall be in feet and measured horizontally and, when measured
from a street, shall be measured from the street right-of-way line
even if the center line of that street is the location of the zoning
district line. The exact location of any disputed zoning district
boundary line shall be determined by the Board of Adjustment.
Where a zoning district boundary line divides
a lot, other than by following a stream or street, any use permitted
in either district may be extended not more than 50 feet into the
adjacent district, or to the boundary line of the divided lot, whichever
is the lesser, by the owners of the lot at the time of passage of
this chapter. A use permitted in the zoning district so extended shall
thereafter be a permitted use in the extended area. A property owner,
however, shall be permitted only one option, after which the lot use
shall be governed by the regulations of the zoning district to which
the portion of the lot shall have been annexed by such extension.
