A. 
New sanitary sewers and all extensions to sanitary sewers owned and operated by the Town shall be designed by a professional licensed to practice sewer design in the state in accordance with the Recommended Standards for Sewage Works, as adopted by the Great Lakes - Upper Mississippi River Board of State Sanitary Engineers (Ten State Standards), and in strict conformance with all requirements of the NYSDEC. Plans and specifications shall be submitted to, and written approval shall be obtained from, the Superintendent, the Erie County Health Department and the NYSDEC or its designated representative before initiating any construction. The design shall anticipate and allow for flows from all possible future extensions or developments within the immediate drainage area.
B. 
If, however, there is inadequate capacity in any sewer which would convey the wastewater or if there is insufficient capacity in the POTW to treat the wastewater properly, the application shall be denied. Sewer line and POTW capacity shall be defined as the present use and that use which has been committed, by resolution, to other users by the Town Board.
A. 
When a property owner, builder or developer proposes to construct sanitary sewers or extensions to sanitary sewers in an area proposed for subdivision, the plans, specifications and method of installation shall be subject to the approval of the Town Consulting Engineer, the Erie County Health Department and the NYSDEC, in accordance with § 114-24.
B. 
Said property owner, builder or developer shall pay for the entire installation, including a proportionate share of the treatment plant, intercepting or trunk sewers, pumping stations, force mains and all other Town expenses, including reasonable costs for plan review by the Town Consulting Engineer and reasonable attorney's fees incidental thereto.
C. 
Each street lateral shall be installed and inspected pursuant to Article VI, and inspection fees shall be paid by the applicant prior to initiating construction. Design and installation of sewers shall be as specified by the Town Consulting Engineer and in conformance with Paragraphs 3 through 6 of ASTM Specification C-12.
D. 
The installation of the sewer shall be subject to periodic inspection by the Town Consulting Engineer. The Town Consulting Engineer or Superintendent shall determine whether the work is proceeding in accordance with the approved plans and specifications and whether the completed work will conform to the approved plans and specifications. The sewer, as constructed, must pass all required testing before any building lateral is connected thereto. The Superintendent shall be notified 30 days in advance of the start of any construction actions so that such inspection frequencies and procedures as may be necessary or required may be established. No new sanitary sewers will be accepted by the Town Board until such construction inspections have been made so as to assure the Town Board of compliance with this chapter and any amendments or additions thereto. The Town Consulting Engineer has the authority to require such excavation as necessary to inspect any installed facilities if the facilities were covered or otherwise backfilled before they were inspected so as to permit inspection of the construction. The Town Consulting Engineer shall report all findings of inspections and tests to the Town Board. All inspection fees of the Town Consulting Engineer shall be reimbursed to the Town Board by the applicant.