A.
The CCD is intended to foster a vibrant, safe, twenty-four-hour
Center City by encouraging residential development while retaining
and further developing a broad range of commercial, office, institutional,
public, cultural and entertainment uses and activities. The regulations
are intended to define and promote the Center City as the anchor for
the region and as a desirable place to live, work and recreate.
B.
Design-based criteria are established to maintain
the historical and architectural character of the Center City and
to guide future development that is compatible and harmonious with
that character. The criteria and base district represent a clear and
easily recognized boundary and point of transition from the character
and land uses of the surrounding neighborhoods.
C.
Design districts are established in specific areas
based on a predominant and easily recognized character or theme that
is self-contained within identifiable boundaries. The districts define
areas having, or proposed to have, specific architectural features
or design elements that make them unique in relation to other areas
in the Center City.
The principles and objectives of the Center
City Master Plan will guide all development and redevelopment in the
CCD and will provide additional criteria for site plan review and
approval. The principles and objectives shall be to:
A.
Develop Center City as the dynamic cultural, economic,
governmental and institutional center and anchor of the region.
B.
Develop the Genesee River as a principal feature of
Center City.
C.
Create a well-defined, accessible open space system
within Center City that links key public places and provides recreational
opportunities and amenities.
D.
Create a pedestrian circulation system that ties Center
City together and links the Genesee River, Main Street and key attractions/destinations.
E.
Reduce the "barrier effect" and negative impacts of
certain physical features of Center City, both man-made and natural.
F.
Create a series of identifiable and recognizable Center
City gateways that provide access into and through Center City.
G.
Create a series of identifiable and recognizable Center
City districts and neighborhoods that retain their unique history,
thematic, functional or design characteristics and are linked or related
to each other.
H.
Increase the number of residents living within Center
City.
I.
Encourage alternate modes of transportation within
Center City whenever and wherever possible.
J.
Reestablish a retail component along the Main Street
corridor and develop the street as the principal east/west "spine"
and circulation route within Center City.
K.
Strengthen the Center City employment base and enhance
the economic viability of Center City.
L.
Increase the number of visitors/tourists (both short-term
and long-term) in Center City.
M.
Promote water-dependent and water-enhanced development
along the Genesee River.
The following activities were completed in developing
the design and performance criteria for the CCD:
A.
Analysis of the form of the Center City. A broad-based
study of the organizational structure of the Center City was undertaken
in order to develop an understanding of its spatial form and evolution
and to identify the relationship between City form and design character.
Based on a comprehensive background information review and an analysis
of development patterns and function, it was concluded that the Center
City is spatially defined by two dominant elements, the Genesee River
and Main Street. These two elements have principally defined development
and circulation patterns. The result is that six urban areas, unique
in character and design quality, have evolved around the Genesee River
and Main Street.
B.
Analysis of the character of the Center City. A detailed
inventory of the Center City was undertaken to document the design
character of the public realm and identify the specific design attributes
that create it. Focused on the two elements which have the greatest
impact on the public realm, buildings and streets, design attributes
which were measurable and quantifiable were inventoried. Based on
the inventory and resulting analysis, areas of common character were
delineated and mapped. (The work undertaken in this activity is described
in detail in the background document "Book 2 - Design Language" dated
March 2002).
C.
Synthesis of form and character analysis. A critical
evaluation of the relationship between form and design character resulted
in the development of the design and performance criteria. The boundary
of the Center City and the regulatory districts within were established
by applying the results of the character analysis to the results of
the form analysis. The design attributes documented during the character
analysis work provide the basis and rationale for the specific design
criteria required in the zoning ordinance. (The work undertaken in
this activity is described in detail in the background document "Book
3 - Design Standards" dated March 2002).
B.
The design and performance criteria for each district
are discussed separately and are independent of one another. An introduction
to each district describes the character to be achieved through implementation
of the criteria, the guiding principles behind the criteria and a
description and key plan of the subdistrict boundary. The introduction
is followed by a detailed description of the design criteria, which
have been organized under the following primary headings and subheadings:
A.
Main Street. Main Street is the most important civic/commercial
street in the CCD and should be designed as the primary public ceremonial
route in the City. Main Street has several design character objectives.
The pedestrian zone is envisioned to include the most generous sidewalks
and outdoor public gathering/plaza spaces. The pedestrian zone should
be well delineated from the vehicular zone. Well-defined pedestrian
crossings should be considered a design priority. Special paving design
at intersections should be considered to enhance the pedestrian experience
and the stature of Main Street. The existing collection of unique
street amenities (light standards, benches, bus shelters, banners,
etc.) should be maintained to clearly distinguish Main Street from
all others in the CCD. Appropriately sized and spaced deciduous street
trees should be integrated into the design of the pedestrian zone
to enhance separation and provide comfort.
B.
City street. City streets serve as the principal facility
for carrying through traffic across the CCD. City streets connect
districts and provide the primary means of entering/exiting the CCD.
City streets have several design character objectives. The pedestrian
zone is envisioned to include generous sidewalks and delineation of
the sidewalk from the vehicular zone with tree lawn. Well-defined
pedestrian crossings should be considered a design priority. Street
amenities (light standards, benches, trash receptacles, etc.) should
be consistent on all city streets to identify them as such. Gateways
should be developed at all points of entry to the CCD. Appropriately
sized and spaced deciduous street trees should be integrated into
the design of the pedestrian zone to enhance separation and provide
comfort.
C.
District street. District streets serve to distribute
and collect traffic between city and neighborhood streets. The pedestrian
zone should be designed to include adequate space for uninterrupted
movement and localized street activities and should be delineated
from the vehicular zone with tree lawns. Well-defined pedestrian crossings
should be considered a design priority. Street amenities (light standards,
benches, trash receptacles, etc.) should be unique to the district
and designed/selected to express the character of the district. Appropriately
sized and spaced deciduous street trees should be integrated into
the design of the pedestrian zone to enhance separation and provide
comfort.
D.
Neighborhood street. Neighborhood streets serve to
provide direct access to local district properties. Neighborhood streets
are envisioned as more personal pedestrian-scaled streets. The pedestrian
zone should be designed to include adequate space for uninterrupted
movement. Similar to district streets, street amenities (light standards,
benches, trash receptacles, etc.) should be unique to the district
and designed/selected to express the character of the district. Appropriately
sized and spaced deciduous street trees should be integrated into
the design of the pedestrian zone to enhance separation and provide
comfort.
A.
All uses are permitted in fully enclosed buildings
in the CCD unless specifically listed as limited or prohibited uses
in this article.
B.
Festivals, events and activities, including those
associated with public parks, plazas and open spaces, are allowed
in any portion of the CCD.
C.
Walk-up
service windows in the CCD.
[Added 9-19-2017 by Ord.
No. 2017-299]
[Amended 9-19-2012 by Ord. No. 2012-363; 8-9-2016 by Ord. No. 2016-263; 11-3-2022 by Ord. No. 2022-322]
A.
The operating
hours of retail sales and service establishments licensed by New York
State as adult-use cannabis retail dispensaries shall be restricted
to liquor store hours.
B.
The operating
hours of on-site cannabis consumption lounges shall be restricted
to bar hours and no later than 11:00 p.m., provided that the operating
hours may be extended to bar hours after 11:00 p.m. if authorized
by special permit.
The following uses are prohibited in any building
or site in the CCD:
A.
In the CCD, no parking shall be required. All applicants
proposing to construct surface parking shall submit a parking demand
analysis that illustrates the following:
B.
Designated building of historic value .
(1)
Demolition of a designated building of historic value
shall be prohibited.
(2)
Significant architectural features, including but
not limited to slate or tile roofing, original cladding, porches,
cornices, etc., shall be maintained.
(3)
Replacement windows in a designated building of historic
value shall utilize true divided lights or simulated divided lights
when matching the original mullion and/or muntin configuration. This
would not include interior-only grids or grids between the panes of
glass.
C.
Applications meeting all design criteria set forth in this article shall not require site plan approval unless such approval is required pursuant to other thresholds as listed in § 120-191 of this chapter.
D.
Applications not meeting the design criteria, within
the specified tolerance limits set forth in the Design Checklist tables
at the end of this chapter, shall require site plan approval.
[Amended 9-21-2010 by Ord. No. 2010-323]
A.
Purpose of the district. The primary purpose of the
design criteria for the CCD Base District is to:
(1)
Preserve the desirable design character of the public
realm of the CCD.
(2)
Promote diversity and variety in the public realm
which maintains and enhances the existing diversity found in the CCD.
(3)
Promote street-level activity and uses.
(4)
Create green streets and mid-block corridors to enhance
pedestrian circulation.
C.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist — Base District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Accessory building coverage
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Maximum accessory building height
|
X
| ||
Orientation to street frontage
|
X
| ||
Front setback
|
X
| ||
Accessory building setbacks
|
X
| ||
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Building facade planes
|
X
| ||
Facade fenestration
|
X
| ||
Equal street frontage facades
|
X
| ||
Vehicular entry width
|
X
|
10%
| |
Service bay depth
|
X
| ||
Facade lighting
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Windows translucent
|
X
| ||
Window recess
|
X
|
30%
| |
Entrance translucent
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Rooftop mechanical/telecommunications equipment
|
X
| ||
Primary construction material
|
X
| ||
Location of refuse storage
|
X
| ||
Refuse storage details (enclosures, doors)
|
X
| ||
SIGNAGE
| |||
Number of building identification signs
|
X
| ||
Location and size of building identification sign
|
X
|
20%
| |
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Number of business signs
|
X
| ||
Size of business signs
|
X
|
20%
| |
Directory sign location and size
|
X
|
20%
| |
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
|
20%
| |
Address sign lighting
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Entrance awning width
|
X
|
10%
| |
Window awning width
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Entry awning projection
|
X
|
10%
| |
Window awning projection
|
X
|
10%
| |
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning equality
|
X
| ||
Awning copy content and size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building parking access
|
X
| ||
Building parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot front yard setback
|
X
|
10%
| |
Parking lot side/rear setback
|
X
|
10%
| |
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle
|
X
| ||
Parking lot pedestrian walkway
|
X
|
10%
| |
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
ADDITIONAL AMENITIES
| |||
Fencing/wall location
|
X
|
10%
| |
Fence gates
|
X
| ||
Walkway at entrances fronting streets
|
X
| ||
Walkway width, material and color
|
X
|
10%
|
D.
Buildings.
(1)
District context.
(c)
Height.
[1]
Buildings heights shall include:
[a]
Main Street: N/A.
[b]
City street: shall be a maximum
six stories in height and a minimum three stories.
[c]
District street: shall be a maximum
five stories in height to a maximum of 48 feet and a minimum two stories.
[d]
Neighborhood street: shall be a
maximum five stories in height to a maximum of 48 feet and a minimum
two stories.
[2]
Accessory building or structure shall be a maximum
of 1 1/2 stories to a maximum 24 feet.
(e)
Setbacks.
[1]
Front yard setback shall be:
[a]
Main Street: N/A.
[b]
City street: shall be within two
feet of the average setback of three adjacent buildings on either
side of the building to a maximum of 15 feet.
[c]
District street: shall be within
two feet of the average setback of three adjacent buildings on either
side of the building to a maximum of 10 feet.
[d]
Neighborhood street: shall be within
two feet of the average setback of three adjacent buildings on either
side of the building to a maximum of nine feet.
[2]
Accessory buildings or structure shall be located
in the rear yard and conform to all primary building requirements.
(2)
District character.
(a)
Facade composition.
[1]
Buildings shall maintain the alignment of horizontal
elements of adjacent existing buildings.
[2]
The maximum length of a facade plane shall be
50 feet. A change in facade plane shall occur when length exceeds
50 feet. The change shall be no less than two feet in depth and 12
feet in length.
[3]
The facade shall be composed to exhibit a vertically
aligned fenestration pattern.
[4]
All facades fronting a street shall be equal.
[5]
One vehicular entrance is permitted per building.
[6]
The depth of any service bay shall accommodate
total vehicle length so as not to interrupt pedestrian circulation
on the sidewalk.
[7]
Facade lighting shall be wall-mounted luminaires
and shall be mounted no higher than the top of the first floor. No
light shall cast upwards.
[8]
Facade lighting shall conform to Illumination
Engineers Society of North America (IESNA) guidelines. No floodlighting
is permitted.
(b)
(d)
Roofline.
[1]
Rooftop mechanical and telecommunications equipment
shall be concealed so as not to be visible from the street.
(e)
Material and color.
[1]
In addition to the windows, a maximum of three
primary construction materials shall be used on any street facade.
[2]
Concrete finishes or precast concrete panels
(tilt wall) that are not exposed aggregate, hammered, embossed, imprinted,
sandblasted or covered with a cement-based acrylic coating shall not
be used as exterior building materials and shall be prohibited on
all exterior walls.
[3]
Metal panels with a depth of less than one inch
or a thickness less than U.S. Standard 26 gauge shall not be used
as exterior building materials and shall be prohibited on all exterior
walls.
[4]
No unpainted masonry or brick materials may
be painted if originally designed to be unpainted. This shall not
include cement block construction.
(f)
Refuse storage.
[1]
Excluding alley streets, refuse storage shall
not be located on a street frontage and shall not be visible from
the street.
[2]
Refuse storage areas shall conform to the following:
[a]
If a loading dock/service bay or
vehicular garage is part of the building, refuse storage shall be
contained within this area.
[b]
If not located within the building,
refuse storage shall be located within a concealed enclosure that
includes solid metal doors, is integral to the building, consists
of the same material as the building and is located at the rear of
the building.
(3)
Signage.
(a)
Building identification signage.
[1]
One sign shall be allowed.
[2]
The sign shall not be placed higher than the
top of the first floor.
[3]
Signs shall be horizontal or vertical and flush
mounted or perpendicular to the building face. Perpendicular signs
shall not project more than four feet from the face of a building
and shall be located a minimum of eight feet from the ground.
[4]
Signs shall not exceed 12 square feet.
[5]
Sign luminaires shall conform to the facade
lighting.
[6]
Sign graphics shall include raised or recessed
copy.
(b)
Business signage.
[1]
A maximum of one sign per ground floor commercial
user shall be permitted and shall be located no higher than the top
of the first floor.
[2]
The total sign area of attached business signs
shall be a maximum of 0.5 square foot for every foot of building frontage.
[3]
Directory signage shall be allowed at each building
entrance and shall be flush mounted and a maximum six square feet.
(c)
Address signage.
(e)
Awning.
[1]
Awnings shall be permitted at building entrances
and windows.
[2]
At building entrances the maximum width shall
be two times the width of the opening.
[3]
At windows the maximum width shall be 1.5 times
the width of the opening.
[4]
First floor awnings shall be a minimum eight
feet and a maximum nine feet above the exterior finished elevation
at the building.
[5]
Building entrance awnings shall project no more
than 14 feet and shall be set back one foot from the lot line.
[6]
Window awnings shall project no more than three
feet.
[7]
Awnings shall be made of flexible woven, natural
or synthetic materials.
[8]
All window awnings shall be equal in material
and color.
[9]
Awning signage copy shall only include building
identification or address located on the valance and shall be a maximum
nine inches in height.
[10]
Awnings shall only be illuminated by building
lighting.
E.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located at intersecting
city streets.
[2]
Building parking shall be located in the rear
yard and be hard surfaced.
[3]
Parking shall be accessed from district, neighborhood
or alley streets.
[4]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
[5]
Parking luminaires shall be located on the building
and conform to the building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located at intersecting
city streets.
[2]
Access to parking lots shall be from district,
neighborhood or alley streets.
[3]
Front yard setback shall be two feet greater
than the larger adjacent building setback and shall be a minimum of
12 feet.
[4]
Side and rear yard setback shall be a minimum
six feet.
[5]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[6]
Parking aisles shall be oriented perpendicular
to the front yard.
[7]
Parking lots shall have one paved pedestrian
walkway to each street frontage sidewalk a minimum six feet and a
maximum eight feet wide. Pedestrian walks shall be hard surfaced and
equal in material and pattern to the adjacent sidewalk.
[8]
Setbacks shall be landscaped with one tree per
250 square feet and continuous ground cover. Parking lots shall be
landscaped with trees and continuous ground cover in curbed islands
so that the parking lot is shaded to a minimum 40% at tree maturity.
[9]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
A.
Purpose of the district. The primary purpose of the
design criteria for the Riverfront District is to:
(1)
Preserve the existing character of the riverfront.
(2)
Promote development compatible with the desirable
built character of the riverfront.
(3)
Improve visual and physical access to the riverfront.
(4)
Provide uninterrupted public access to the river's
edge.
(5)
Promote the riverfront as a place for public gathering
and activity.
(6)
Reduce the "barrier" effect of the river separating
the east and west sides of the Center City; strengthen linkages across
the river.
B.
District boundaries and definition. The boundaries
of the Riverfront District were determined by including all areas
that had a physical and/or visual connection (literal or implied)
to the river. Buildings that expressed character or common design
attributes consistent with the character described in "Design Language"
were included. The Riverfront District is continuous and uninterrupted
along the river corridor within the CCD.
C.
Design character of the district. The Riverfront District
is characterized by pedestrian-scaled buildings with clearly defined
bases, midsections and crowns. Buildings range from three to six stories
in height and transition upwards as they move away from the water's
edge. A thirty-foot buffer is maintained along the river and no structures
are allowed in the buffer; pedestrian access to the river is a priority
in the district. Buildings are tall, narrow masses with rich materials
and colors. Minimum front setbacks create intensified pedestrian-scaled
streets with an apparent riverfront theme.
D.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - Riverfront District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Orientation to street frontage
|
X
| ||
Orientation to river
|
X
| ||
Front setback
|
X
| ||
Side and rear setback
|
X
| ||
Setback at river
|
X
| ||
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Facade composition
|
X
| ||
Equal street/river frontage facades
|
X
| ||
Vehicular entry location
|
X
| ||
Vehicular entry door
|
X
|
20%
| |
Facade lighting
|
X
| ||
Window openings
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Windows translucent
|
X
|
20%
| |
Window recess
|
X
|
30%
| |
Entrances on street frontage
|
X
| ||
Entrances on riverfront
|
X
| ||
Entrance elevation
|
X
| ||
Entrance translucent
|
X
|
20%
| |
Entrance recess
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Roofline
|
X
| ||
Roofline cornice
|
X
|
20%
| |
Rooftop mechanical/telecommunications equipment
|
X
| ||
Primary construction material
|
X
| ||
Percent primary construction material
|
X
|
20%
| |
Number of colors
|
X
|
50%
| |
Location of refuse storage
|
X
| ||
Refuse storage details (enclosures, doors)
|
X
| ||
SIGNAGE
| |||
Number of building identification signs
|
X
| ||
Location of building identification sign
|
X
| ||
Size of building identification sign
|
X
|
20%
| |
Building identification sign materials
|
X
| ||
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Building identification sign colors
|
X
|
30%
| |
Number of business signs
|
X
| ||
Location of business signs
|
X
| ||
Size of business signs
|
X
|
20%
| |
Projection sign supports
|
X
| ||
Business sign materials, illumination and color
|
X
|
30%
| |
Directory sign location and size
|
X
|
20%
| |
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
| ||
Address sign materials
|
X
| ||
Address sign lighting
|
X
| ||
Heritage sign and location
|
X
| ||
Heritage sign material
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Entrance awning size
|
X
|
10%
| |
Window awning size
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Awning projection
|
X
|
10%
| |
Awning support/attachments
|
X
| ||
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning equality
|
X
| ||
Awning copy size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SKYWAY
| |||
Skyway height
|
X
| ||
Interior skyway parallel to exterior facade
|
X
| ||
Skyway width
|
X
|
10%
| |
Skyway nontranslucent walls
|
X
|
20%
| |
Skyway supported from facade
|
X
| ||
Skyway lighting
|
X
| ||
Skyway windows translucent
|
X
|
10%
| |
Skyway entrances direct from building
|
X
| ||
Skyway entrances identified and translucent
|
X
|
10%
| |
Skyway entrance lighting
|
X
| ||
Skyway roofline
|
X
| ||
Skyway material and color
|
X
| ||
Skyway benches quantity
|
X
| ||
Skyway benches size
|
X
|
20%
| |
Skyway interpretive panel size
|
X
|
20%
| |
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building parking access
|
X
| ||
Building parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot setback
|
X
| ||
Parking lot setback on river
|
X
|
10%
| |
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle
|
X
| ||
Parking lot walls setback
|
X
|
10%
| |
Parking lot walls height
|
X
|
10%
| |
Parking lot pedestrian openings
|
X
|
10%
| |
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
Parking lot lighting height
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Fencing location
|
X
| ||
Fencing/wall setback
|
X
| ||
Fencing height
|
X
|
10%
| |
Fencing material and translucence
|
X
|
10%
| |
Gates equal to fencing
|
X
| ||
Wall location
|
X
| ||
Wall height
|
X
|
10%
| |
Wall materials
|
X
| ||
Riverfront promenade location and width
|
X
|
10%
| |
Riverfront promenade entrance
|
X
|
10%
| |
Riverfront promenade grade elevation
|
X
| ||
Riverfront promenade materials
|
X
| ||
Riverfront promenade benches
|
X
|
20%
| |
Riverfront promenade light level and fixture
|
X
| ||
Riverfront plaza landscaping
|
X
|
20%
| |
Riverfront plaza lighting
|
X
|
20%
|
E.
Design principles for the district. Design principles
in the Riverfront District should concentrate on reestablishing the
Genesee River as the focus of cultural, social and recreational activity
in the Center City. The strengthening of connections both to the riverfront
and across the river is essential. The creation of a continuous public
space along the riverfront should be promoted in conjunction with
human-scaled development along the river. Views and sight lines to
the river, from throughout the district, should be enhanced.
F.
Buildings.
(1)
District context.
(c)
Height.
[1]
Unless otherwise noted, buildings heights shall
include:
[a]
Main Street: shall be a maximum
of six stories in height to a maximum of 72 feet and a minimum of
three stories to 30 feet.
[b]
City street: shall be a maximum
of six stories in height to a maximum of 72 feet and a minimum of
three stories to 30 feet.
[c]
District street: shall be a maximum
of six stories in height to a maximum of 72 feet and a minimum of
three stories to 30 feet.
[3]
No building within a three-hundred-foot radius
of City Hall shall exceed the height of City Hall, excluding the tower.
(2)
District character.
(a)
Facade composition.
[4]
Buildings with river frontage shall be designed
with a facade along the river equal in prominence to its primary street
facade.
[5]
All facades higher than adjacent and abutting
buildings shall be equal to street facades.
[9]
Facade lighting shall conform to Illumination
Engineers Society of North America (IESNA) guidelines. No floodlighting
is permitted.
(b)
(e)
(3)
Signage.
(a)
Building identification signage.
[1]
One sign shall be allowed on each street frontage.
[5]
Sign materials shall include any of the district
building materials, wood and metal.
[6]
Sign luminaires shall conform to facade lighting.
[7]
Sign graphics shall include raised or recessed
copy.
[8]
Signs shall include no more than three colors.
(b)
Business signage.
[2]
Signs shall be integrated into the facade pattern
and shall be flush mounted or projecting.
[5]
Supports for projecting signs shall be attached
to the building facade at no more than two points.
[6]
Materials, illumination and color shall conform
to the criteria for building identification signage.
(c)
(d)
Heritage signage.
(e)
Awnings.
[7]
Awning support shall include building attachments
only.
[8]
Awnings shall be made of flexible woven, natural
or synthetic materials.
[9]
Awning fabric shall include no more than three
colors.
[10]
All window awnings shall be equal in material
and color.
[11]
Awning signage copy shall only include building
identification or address located on the valence and shall be a maximum
eight inches in height.
G.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located on the
riverfront.
[2]
Building parking shall not be located at Main
Street intersections and at all intersecting city streets.
[5]
Light level shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
[6]
Parking luminaires shall be located on the building
and conform to the building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located on the riverfront.
[2]
Parking lots shall not be located at Main Street
intersections and at all intersecting city streets.
[5]
Front yard setback on streets that cross the
river shall be 10 feet.
[9]
Parking aisles shall be oriented perpendicular
to the front yard.
[16]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
(2)
Additional amenities.
(a)
Fencing/wall.
(b)
Riverfront promenade/plaza.
[4]
Promenade/plaza shall be wood, concrete or modular
unit paving.
[5]
Promenade benches shall be provided at a minimum
of one bench per 50 feet. Plaza benches shall be provided at a minimum
of one bench per 35 feet of street frontage.
[6]
Plaza shall be landscaped with trees so that
the area is shaded to a minimum 50% at tree maturity.
[8]
Plazas shall be illuminated. Lighting level
shall conform to Illumination Engineers Society of North America (IESNA)
guidelines.
H.
[1]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
[1]
Editor's Note: Former Subsection H, Noise level performance
criteria, was repealed 9-21-2010 by Ord. No. 2010-323, which ordinance
also redesignated former Subsection I as Subsection H.
A.
Purpose of the district. The purpose of the design
criteria for the Main Street District is to:
(1)
Preserve the existing character and rich public realm
qualities of Main Street.
(2)
Preserve and enhance Main Street as the primary commercial
street in the CCD.
(3)
Enhance the civic nature of Main Street; encourage
a variety of street-related activities and uses.
(4)
Promote Main Street as the primary ceremonial space
in the City.
B.
District boundaries and definition. The boundaries
of the Main Street District were determined by including all buildings
and properties that front onto Main Street and/or intersecting streets.
The section of Main Street that crosses the river is part of the Riverfront
District. Properties on North Fitzhugh Street, the west side of North
Plymouth Avenue and the area east of Exchange Boulevard and north
of I-490 are included because of the historical civic quality of the
public realm.
C.
Design character of the district. The design intent
of the Main Street District is to promote Main Street as the dominant
corridor in the Center City. The typical design character of the district
is defined by buildings ranging in height from three to 15 stories
which have clearly defined bases, midsections and crowns. Primary
entrances are located along Main Street to provide maximum accessibility.
Buildings are rich in material and detail and possess a monumental
quality. Consistent setbacks create strong edges and promote spatial
definition along the streetscape.
D.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - Main Street District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Tolerance
|
BUILDINGS
| |||
Building form and mass (base, midsection, crown)
|
X
| ||
Buildings greater than 5 stories tall/narrow mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Minimum lot frontage w. of Plymouth Ave./e. of Chestnut St.
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Minimum and maximum building height w. of Plymouth Ave./e. of
Chestnut St.
|
X
| ||
Minimum and maximum building height fronting N. Fitzhugh St.
and N. Plymouth Ave.
|
X
| ||
Buildings within 300 feet of City Hall
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Length to height ratio w. of Plymouth Ave./e. of Chestnut St.
|
X
|
20%
| |
Orientation to Main Street frontage
|
X
| ||
Front setback
|
X
| ||
Side setback
|
X
| ||
Front plaza setback
|
X
|
10%
| |
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Facade composition
|
X
| ||
Equal street frontage facades
|
X
| ||
Facades higher than abutting buildings
|
X
| ||
Vehicular entry location
|
X
| ||
Vehicular entry width
|
X
|
10%
| |
Vehicular entry door
|
X
|
20%
| |
Service bay depth
|
X
| ||
Facade lighting
|
X
| ||
Window openings
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Window translucency
|
X
|
20%
| |
Window recess
|
X
|
30%
| |
Entrances on street frontage
|
X
| ||
Primary entrances on Main Street
|
X
| ||
Entrance elevation
|
X
| ||
Entrance translucency
|
X
|
20%
| |
Entrance recess
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Roofline
|
X
| ||
Roofline cornice
|
X
|
20%
| |
Rooftop mechanical/telecommunications equipment
|
X
| ||
Primary construction material
|
X
| ||
Percent primary construction material
|
X
|
20%
| |
Number of colors
|
X
|
50%
| |
Location of refuse storage
|
X
| ||
Refuse storage details (enclosures, doors)
|
X
| ||
SIGNAGE
| |||
Number of building identification signs
|
X
| ||
Location of building identification sign
|
X
| ||
Size of building identification sign
|
X
|
20%
| |
Building identification sign materials
|
X
| ||
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Building identification sign colors
|
X
|
30%
| |
Number of business signs
|
X
| ||
Location of business signs
|
X
| ||
Size of business signs
|
X
|
20%
| |
Business sign materials, illumination and color
|
X
|
30%
| |
Directory sign location and size
|
X
|
20%
| |
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
| ||
Address sign materials
|
X
| ||
Address sign lighting
|
X
| ||
Heritage sign and location
|
X
| ||
Heritage sign material
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Window awning size
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Awning projection
|
X
|
10%
| |
Awning support/attachments
|
X
| ||
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning equality
|
X
| ||
Awning copy size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SKYWAY
| |||
Skyway height
|
X
| ||
Interior skyway parallel to exterior facade
|
X
| ||
Skyway width
|
X
|
10%
| |
Skyway nontranslucent walls
|
X
|
20%
| |
Skyway supported from facade
|
X
| ||
Skyway lighting
|
X
| ||
Skyway window translucency
|
X
|
10%
| |
Skyway entrances direct from building
|
X
| ||
Skyway entrances identified and translucent
|
X
|
10%
| |
Skyway entrance lighting
|
X
| ||
Skyway roofline
|
X
| ||
Skyway material and color
|
X
| ||
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building underground parking access
|
X
| ||
Parking garage entry width
|
X
|
10%
| |
Underground parking pedestrian access direct from building
|
X
| ||
Underground parking mechanical equipment location
|
X
| ||
Building underground parking entry lighting
|
X
| ||
Building rear yard parking lot access
|
X
| ||
Building rear yard parking lot lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot setback
|
X
|
10%
| |
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle
|
X
| ||
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
Parking lot fence material, height and % translucent
|
X
|
10%
| |
Parking lot fence pedestrian openings
|
X
|
10%
| |
Parking lot pedestrian walks
|
X
|
10%
| |
Parking lot lighting height
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Wall setback
|
X
| ||
Wall height
|
X
|
10%
| |
Wall materials
|
X
| ||
Plaza/forecourt entrances
|
X
|
10%
| |
Plaza/forecourt grade elevation
|
X
|
20%
| |
Plaza/forecourt materials
|
X
| ||
Plaza/forecourt landscaping
|
X
|
20%
| |
Plaza/forecourt lighting
|
X
|
20%
|
E.
Design principles for the district. The design principles
for the Main Street District are intended to establish Main Street
as the most important pedestrian street in the Center City and reestablish
it as the focus of commercial activity and civic celebrations. Main
Street will be promoted as the spine that links all the districts
together.
F.
Buildings.
(1)
District context.
(c)
Height.
[1]
Unless otherwise noted, building heights shall
include:
[a]
Main Street: shall be a maximum
15 stories in height to a maximum of 180 feet and a minimum five stories.
[b]
City street: shall be a maximum
15 stories in height to a maximum of 180 feet and a minimum five stories.
[c]
District street: shall be a maximum
15 stories in height to a maximum of 180 feet and a minimum five stories.
[3]
Buildings that front North Fitzhugh Street and
North Plymouth Avenue shall be a maximum five stories in height to
a maximum 60 feet and a minimum three stories.
[4]
No building within a three-hundred-foot radius
of City Hall shall exceed the height of City Hall, excluding the tower.
(2)
District character.
(a)
Facade composition.
[6]
Vehicular entrances shall be a maximum 11 feet
wide.
[8]
Vehicular entrances that consist of loading
docks/service bays shall be enclosed with garage doors, integrated
into the building facade and not extend beyond the top of the first
floor. The garage door shall be recessed from the plane of the facade
between three feet and five feet and shall be a minimum of 20% translucent.
[11]
Facade lighting shall conform to Illumination
Engineers Society of North America (IESNA) guidelines. No floodlighting
is permitted.
(b)
(c)
(e)
(3)
Signage.
(a)
Building identification signage.
[1]
One sign shall be allowed and shall front on
Main Street.
[5]
Sign materials shall include any of the district
building materials and metal.
[6]
Sign luminaires shall conform to facade lighting.
[7]
Sign graphics shall include raised or recessed
copy.
[8]
Signs shall include no more than three colors.
(b)
(c)
(d)
(e)
Awning.
[6]
Awning support shall include building attachments
only.
[7]
Awnings shall be made of flexible woven, natural
or synthetic materials.
[8]
Awning fabric shall include no more than three
colors.
[9]
All window awnings shall be equal in material
and color.
[10]
Awning signage copy shall only include building
identification or address located on the valance and shall be a maximum
10 inches in height.
[11]
Awnings shall be illuminated by building lighting
only.
G.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located at Main
Street intersections and at all intersecting city streets.
[2]
Building parking shall be located in the rear
yard and be hard surfaced or be underground.
[3]
Underground parking entrance shall be at the
facade and located fronting city, district, neighborhood or alley
streets.
[5]
Pedestrian access from underground parking shall
be integral to the building.
[6]
Mechanical equipment for underground parking
shall be integral to the building.
[7]
Light level at the entrance to underground parking
shall conform to Illumination Engineers Society of North America (IESNA)
guidelines.
[8]
Rear yard parking shall be accessed from city,
district, neighborhood or alley streets.
[9]
Light level shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
[10]
Parking luminaires shall be located on the building
and conform to building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located at Main Street
intersections and at all intersecting city streets.
[2]
Access to parking lots shall be from city, district,
neighborhood or alley streets.
[4]
Frontage setback on city, district and neighborhood
streets shall be 10 feet in addition to the district sidewalk criteria.
[6]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[13]
Light level shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
(2)
Additional amenities.
(b)
Plaza/forecourt.
[1]
Entrances into the plaza/forecourt shall be
provided on all street frontages; entrances shall be a minimum of
10 feet wide.
[3]
Plaza/forecourt shall be concrete or modular
unit paving.
[4]
Benches shall be provided at a minimum of one
bench per 35 feet of frontage.
[7]
Plazas shall be illuminated and shall conform
to Illumination Engineers Society of North America (IESNA) guidelines.
[8]
Light fixtures shall not exceed 18 feet in height.
No light shall be cast upwards.
H.
[1]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
[1]
Editors Note: Former Subsection H, Noise level performance
criteria, was repealed 9-21-2010 by Ord. No. 2010-323, which ordinance
also redesignated former Subsection I as Subsection H.
A.
Purpose of the district. The primary purpose of the
design criteria for the Grove Place District is to:
(1)
Preserve the existing pedestrian-scaled character
of the area.
(2)
Preserve and enhance the heritage qualities of the
district.
(3)
Promote the district as an enclave which expresses
a rich residential quality; build upon and draw from the quality of
the Grove Place neighborhood.
(4)
Enhance the green quality of the public realm.
(5)
Promote a strong relationship between personal space
and the public realm.
B.
District
boundaries and definition.
[Amended 12-17-2013 by Ord. No. 2013-415]
(1)
District
boundaries. The boundaries of the Grove Place District were determined
by identifying the area that expressed the pedestrian-scaled character
and public realm quality identified during the CCD inventory and analysis.
Based upon the development goals and objectives established in the
CCD Master Plan and the urban design potentials established in "Design
Language," opportunities to expand the desired character were captured
in the boundary limits.
(2)
Residential
subarea. The Grove Place District shall contain a residential subarea,
Grove Place R-Residential, as reflected on the map below. The residential
subarea will be subject to all requirements of the CCD District and
the Center City Grove Place provisions except the permitted and specially
permitted uses indicated below.
C.
Permitted
uses.
[Added 12-17-2013 by Ord. No. 2013-415[1]]
(2)
Grove
Place R-Residential. The following uses are permitted in the Grove
Place R-Residential subarea:
(a)
Single-family detached dwellings.
(b)
Single-family attached dwellings.
(c)
Two-family dwellings.
(d)
Family and group family day-care homes.
(e)
Adult family day-care homes.
(f)
Places of worship.
(h)
Adaptive use of designated landmarks, subject to the additional requirements for specified uses in § 120-130.
(i)
Bed-and-breakfast establishments, subject to the additional requirements for specified uses in § 120-132.
(k)
Hospice.
(l)
Offices within existing structures, excluding clinics.
E.
Design character of the district. The Grove Place
District is characterized by one-and-one-half to three-story residential-style
buildings with a variety of rooflines. Traditional residential features
are evident throughout the district and include features such as front
porches, raised entrances, bay windows, front yard gardens and entry
courts. Buildings within the district are generally rich in their
material composition, color, texture and detail. Heritage-based themed
streets are heavily planted with trees and a variety of different
ground cover, contributing to the desired character of the neighborhood.
F.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - Grove Place District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Accessory building coverage
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Maximum accessory building height
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Orientation to street frontage
|
X
| ||
Front setback
|
X
| ||
Side setback
|
X
| ||
Rear yard setback
|
X
| ||
Accessory building setbacks
|
X
| ||
DISTRICT CHARACTER
| |||
Building facade planes
|
X
| ||
First floor structural feature
|
X
| ||
Equal street frontage facades
|
X
| ||
Vehicular entry
|
X
| ||
Facade lighting
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Window translucency
|
X
| ||
Window recess
|
X
|
30%
| |
Entrances on street frontage
|
X
| ||
Entrances elevation
|
X
|
20%
| |
Entrance translucency
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Porch location on buildings 2 1/2 stories or less
|
X
| ||
Porch size
|
X
|
20%
| |
Porch roof
|
X
| ||
Porch materials
|
X
| ||
Roofline
|
X
| ||
Provide skylights or dormers on buildings 2 1/2 stories
or less
|
X
| ||
Chimney facade
|
X
| ||
Mechanical/telecommunications equipment concealed
|
X
| ||
Primary construction material
|
X
| ||
Percent primary construction material
|
X
|
20%
| |
Number of colors
|
X
|
50%
| |
Location of refuse storage
|
X
| ||
SIGNAGE
| |||
Refuse storage details (enclosures, doors)
|
X
| ||
Number of building identification signs
|
X
| ||
Location and size of building identification sign
|
X
|
20%
| |
Orientation and setback of freestanding building identification
sign
|
X
|
10%
| |
Building identification sign materials
|
X
| ||
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Building identification sign colors
|
X
|
30%
| |
Number of business signs
|
X
| ||
Location of business signs
|
X
|
10%
| |
Size of business signs
|
X
|
20%
| |
Projecting business signs
|
X
|
10%
| |
Projecting business sign supports
|
X
| ||
Business sign materials, illumination and color
|
X
|
30%
| |
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
|
20%
| |
Address sign materials
|
X
| ||
Address sign lighting
|
X
| ||
Heritage sign and location
|
X
| ||
Heritage sign material
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Entrance awning width
|
X
|
10%
| |
Window awning width
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Awning projection
|
X
|
10%
| |
Awning support/attachments
|
X
| ||
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning equality
|
X
| ||
Awning copy content and size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building parking access
|
X
| ||
Building parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot frontage
|
X
|
10%
| |
Parking lot setback
|
X
| ||
Parking lot surfacing and curbing
|
X
| ||
Parking lot wall material
|
X
| ||
Parking lot wall height
|
X
|
10%
| |
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
Parking lot lighting height
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Fencing height
|
X
|
10%
| |
Fencing material
|
X
| ||
Fence gates
|
X
| ||
Wall setback
|
X
| ||
Wall height
|
X
|
10%
| |
Fence/wall height on street frontage
|
X
|
10%
| |
Wall material
|
X
| ||
Front yard landscaping
|
X
|
20%
| |
Walkway at entrances fronting streets
|
X
| ||
Walkway width, material and color
|
X
|
10%
| |
Freestanding lighting
|
X
|
20%
|
G.
Design principles for the district. The intention
of the design of the Grove Place District is to create pedestrian-scaled
enclaves that discourage through traffic. Buildings should be created
which exhibit the traditional residential character of the district.
The creation of "green" streets strengthens pedestrian linkages through
the district. Creating a strong relationship between public streets
and private spaces is encouraged. The preservation of heritage resources
and qualities is a primary concern.
H.
Buildings.
(1)
District context.
(c)
Height.
[1]
Unless otherwise noted, buildings heights shall
include:
(f)
Setbacks.
[1]
Unless otherwise noted, front yard setback shall
be:
[a]
Main Street: N/A.
[b]
City street: within two feet of
the average setback of three adjacent buildings on both sides of the
building to a maximum 15 feet and a minimum six feet.
[c]
District street: within two feet
of the average setback of three adjacent buildings on both sides of
the building to a maximum 15 feet and a minimum six feet.
(2)
District character.
(a)
(b)
(c)
(f)
Material and color.
[1]
In addition to windows for buildings 2 1/2 stories
or less, the primary construction material shall be clay brick, stone,
wood or vinyl bevel siding.
[2]
In addition to windows for buildings 2 1/2 stories
or greater, the primary construction material shall be clay brick,
stone, wood or vinyl bevel siding, stucco [exterior insulation finish
system (EIFS)] or decorative concrete.
[5]
Excluding windows, a maximum of three colors
shall be permitted.
(3)
Signage.
(a)
Building identification signage.
[1]
One sign shall be allowed.
[2]
Sign shall be horizontal and flush mounted or
freestanding.
[6]
Sign materials shall include any of the district
building materials and metal.
[7]
Sign luminaires shall conform to facade lighting.
[8]
Freestanding sign illumination source shall
be at or below grade and shall illuminate the sign only. No stray
light is permitted.
[9]
Sign graphics shall include raised or recessed
copy.
[10]
Signs shall include no more than four colors.
(b)
(c)
(d)
(e)
Awning.
[7]
Awning supports shall include building attachments
only.
[8]
Awnings shall be made of flexible woven, natural
or synthetic materials.
[9]
Awning fabric shall include no more than three
colors.
[10]
All window awnings shall be equal in material
and color.
[12]
Awnings shall be illuminated by building lighting
only.
I.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located at intersecting
city streets.
[4]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
[5]
Parking luminaires shall be located on the building
and conform to building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located at intersecting
city streets.
[6]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[11]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
(2)
Additional amenities.
(a)
Fencing/walls.
[1]
Fencing on street frontages shall have a maximum
height of four feet.
[3]
On street frontages fencing shall be ornamental
picket of cast or extruded metal. Wood fencing is permitted in side
and rear yards.
[4]
Gates shall be equal to fencing.
[5]
Street frontage wall setback shall be a minimum
two feet or two feet greater than district sidewalk criteria.
[7]
Combined fencing/walls on street frontages shall
not exceed four feet in height.
[8]
Excluding wood or vinyl bevel siding, walls
shall conform to district building materials.
J.
[2]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
A.
Purpose of the district. The primary purpose of the
design criteria for the East End District is to:
(1)
Preserve the desirable design character of the public
realm of the district.
(2)
Promote diversity and variety in the public realm
which maintains and enhances the existing diversity found.
(3)
Promote street-level activity and uses.
(4)
Create green streets and midblock corridors to enhance
pedestrian circulation.
(5)
Mitigate to impact of the Inner Loop and allow for
its future removal and redevelopment as outlined in previous planning
studies.
C.
Design character of the district. The East End District
is defined by an assortment of building types, ranging in height from
two to four stories. Rooflines, building materials and building orientation
vary throughout the district, contributing to the district's character.
Landscaped alleyways create an internal pedestrian system and provide
access to rear lots. Building setbacks in the East End District are
minimal, contributing to a pedestrian scale and promoting street-level
activity.
D.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - East End District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Accessory building coverage
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Maximum accessory building height
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Orientation to street frontage
|
X
| ||
Front setback
|
X
| ||
Side setback
|
X
| ||
Rear yard setback
|
X
| ||
Accessory building setbacks
|
X
| ||
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Building facade planes
|
X
| ||
Facade fenestration
|
X
| ||
Equal street frontage facades
|
X
| ||
Vehicular entry width
|
X
|
10%
| |
Service bay depth
|
X
| ||
Facade lighting
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Window translucency
|
X
| ||
Window recess
|
X
|
30%
| |
Entrances on street frontage
|
X
| ||
Entrances elevation
|
X
|
20%
| |
Entrance translucency
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Roofline
|
X
| ||
Roofline cornice
|
X
|
20%
| |
Rooftop mechanical/telecommunications equipment
|
X
| ||
Primary construction material
|
X
| ||
Percent primary construction material
|
X
|
20%
| |
Number of colors
|
X
|
50%
| |
Location of refuse storage
|
X
| ||
Refuse storage details (enclosures, doors)
|
X
| ||
SIGNAGE
| |||
Number of building identification signs
|
X
| ||
Location and size of building identification sign
|
X
|
20%
| |
Building identification sign materials
|
X
| ||
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Building identification sign colors
|
X
|
30%
| |
Number of business signs
|
X
| ||
Location of business signs
|
X
| ||
Size of business signs
|
X
|
20%
| |
Business sign materials, illumination and color
|
X
|
30%
| |
Directory sign location and size
|
X
|
20%
| |
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
|
20%
| |
Address sign materials
|
X
| ||
Address sign lighting
|
X
| ||
Heritage sign and location
|
X
| ||
Heritage sign material
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Entrance awning width
|
X
|
10%
| |
Window awning width
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Entry awning projection
|
X
|
10%
| |
Freestanding awning support setback
|
X
| ||
Window awning projection
|
X
|
10%
| |
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning equality
|
X
| ||
Awning copy content and size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building parking access
|
X
| ||
Building parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot front yard setback
|
X
|
10%
| |
Parking lot side/rear setback
|
X
|
10%
| |
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle
|
X
| ||
Parking lot pedestrian walkway
|
X
|
10%
| |
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
Parking lot lighting height
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Fencing/wall location
|
X
|
10%
| |
Fencing/wall height
|
X
|
10%
| |
Fencing material
|
X
| ||
Fence gates
|
X
| ||
Fence/wall street frontage setback
|
X
|
10%
| |
Front yard landscaping
|
X
|
20%
| |
Walkway at entrances fronting streets
|
X
| ||
Walkway width, material and color
|
X
|
10%
| |
Freestanding lighting
|
X
|
20%
|
E.
Design principles for the district. Design principles
for the East End District should encourage compact, dense development,
with a focus on developing low-rise structures, including townhouse
and garden apartment styled buildings. A greenway system should be
developed in the district to act as an organizing element, enhancing
connections to key destinations in the public realm. Linkages between
the district and the other CCD Districts should be improved.
F.
Buildings.
(1)
District context.
(c)
Height.
[1]
Unless otherwise noted, building heights shall
include:
(f)
Setbacks.
[1]
Unless otherwise noted, front yard setback shall
be:
[a]
Main Street: N/A.
[b]
City street: shall be within two
feet of the average setback of three adjacent buildings on either
side of the building to a maximum of 10 feet.
[c]
District street: shall be within
two feet of the average setback of three adjacent buildings on either
side of the building to a maximum of 10 feet.
(2)
District character.
(a)
(c)
(d)
(e)
(3)
Signage.
(a)
Building identification signage.
[1]
One sign shall be allowed.
[4]
Signs shall not exceed 12 square feet.
[5]
Sign materials shall include any of the approved
district building materials and metal.
[6]
Sign luminaires shall conform with the facade
lighting.
[7]
Sign graphics shall include raised or recessed
copy.
[8]
Signs shall include no more than four colors.
(b)
Business signage.
[3]
Individual sign area shall be a maximum 12 square
feet; total sign area shall be a maximum 40% of the property frontage.
[4]
Materials, illumination and colors shall conform
to the criteria for building identification signage.
[5]
Directory signage shall be allowed at each building
entrance, shall be flush mounted and a maximum six square feet.
(c)
(d)
(e)
Awning.
[2]
At building entrances the maximum width shall
be two times the width of the opening.
[3]
At windows the maximum width shall be 1.5 times
the width of the opening.
[8]
Awnings shall be made of flexible woven, natural
or synthetic materials.
[9]
Awning fabric shall include no more than three
colors.
[10]
All window awnings shall be equal in material
and color.
[11]
Awning signage copy shall only include building
identification or address located on the valance and shall be a maximum
nine inches in height.
[12]
Awnings shall only be illuminated by building
lighting.
G.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located at intersecting
city streets.
[3]
Parking shall be accessed from district, neighborhood
or alley streets.
[4]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
[5]
Parking luminaires shall be located on the building
and conform to the building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located at intersecting
city streets.
[2]
Access to parking lots shall be from district,
neighborhood or alley streets.
[5]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[10]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
(2)
Additional amenities.
(a)
Fencing/wall.
[1]
Fencing/wall shall not be located on primary
street frontage.
[3]
Fencing/wall shall have a maximum height of
five feet in rear and side yards and a maximum height of four feet
on secondary street frontages.
[4]
On street frontages, fencing shall be ornamental
picket of cast or extruded metal. Wood fencing is permitted in side
and rear yards.
[5]
Excluding wood or vinyl bevel siding, walls
shall conform to district building materials.
[6]
Gates shall be equal to fencing.
H.
[1]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
[1]
Editors Note: Former Subsection H, Noise level performance
criteria, was repealed 9-21-2010 by Ord. No. 2010-323, which ordinance
also redesignated former Subsection I as Subsection H.
A.
Purpose of the district. The primary purpose of the
design criteria for the Tower District is to:
C.
Design character of the district. Buildings in the
Tower District have a clearly defined base, midsection and crown and
have a high degree of transparency at ground level. The flexibility
in street setbacks allows for enriched public spaces and the creation
of plazas for gatherings. Buildings in the Tower District have easily
identifiable entrances on all street frontages. Promenade-like streets,
with wide sidewalks, improve the pedestrian experience and allow for
a variety of public uses and activities.
D.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - Tower District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Minor Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building coverage relative to block
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Orientation to street frontage
|
X
| ||
Front setback
|
X
| ||
Front plaza setback
|
X
|
10%
| |
Side/rear setback
|
X
| ||
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Facade composition (base, midsection, crown)
|
X
| ||
Equal street frontage facades
|
X
| ||
Facades higher than abutting buildings
|
X
| ||
Vehicular entry location
|
X
| ||
Vehicular entry width
|
X
|
10%
| |
Vehicular entry to parking garage
|
X
| ||
Vehicular entry door
|
X
|
20%
| |
Service bay depth
|
X
| ||
Facade lighting
|
X
| ||
Lighting at vehicular entrances
|
X
| ||
Window organization
|
X
| ||
Base facade window coverage
|
X
|
10%
| |
Midsection/crown window height to width ratio
|
X
|
20%
| |
Windows translucent
|
X
|
20%
| |
Entrances on street frontage
|
X
| ||
Entrance elevation
|
X
| ||
Entrance articulation and percent translucent
|
X
|
20%
| |
Entrance recess
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Rooftop mechanical/telecommunications equipment
|
X
| ||
Base primary construction material
|
X
| ||
Base primary colors
|
X
|
30%
| |
Midsection/crown colors
|
X
| ||
Location of refuse storage
|
X
| ||
SIGNAGE
| |||
Building/corporate identification sign and size
|
X
|
10%
| |
Mounting of building identification sign
|
X
| ||
Number of business signs
|
X
| ||
Location of business signs
|
X
| ||
Size of business signs
|
X
|
20%
| |
Address sign location
|
X
| ||
Address sign size
|
X
|
20%
| |
SKYWAY
| |||
Skyway height
|
X
| ||
Interior skyway parallel to exterior facade
|
X
| ||
Skyway width
|
X
|
10%
| |
Skyway nontranslucent walls
|
X
|
20%
| |
Skyway supported from facade
|
X
| ||
Skyway lighting
|
X
| ||
Skyway windows translucent
|
X
|
10%
| |
Skyway entrances direct from building
|
X
| ||
Skyway entrances identified and translucent
|
X
|
10%
| |
Skyway entrance lighting
|
X
| ||
Skyway roofline
|
X
| ||
Skyway material and color
|
X
| ||
Skyway benches quantity
|
X
| ||
Skyway benches size
|
X
|
20%
| |
Skyway interpretive panel size
|
X
|
20%
| |
SITE
| |||
Building underground parking location
|
X
| ||
Building underground parking access
|
X
| ||
Parking garage entry width
|
X
|
10%
| |
Underground parking pedestrian access direct from building
|
X
| ||
Underground parking mechanical equipment location
|
X
| ||
Building underground parking entry lighting
|
X
| ||
Building surface parking size
|
X
| ||
Building surface parking location, surfacing and curbing
|
X
| ||
Building surface parking access
|
X
| ||
Building surface parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot setback
|
X
| ||
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle orientation
|
X
| ||
Parking lot landscaping
|
X
|
20%
| |
Parking lot shaded area
|
X
|
20%
| |
Parking lot pedestrian walks
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Drive-through location
|
X
| ||
Wall setback
|
X
| ||
Wall height
|
X
|
10%
| |
Wall materials
|
X
| ||
Plaza/forecourt entrances
|
X
|
10%
| |
Plaza/forecourt grade elevation
|
X
|
20%
| |
Plaza/forecourt materials
|
X
| ||
Plaza/forecourt benches
|
X
|
20%
| |
Plaza/forecourt landscaping
|
X
|
20%
| |
Plaza/forecourt lighting
|
X
|
20%
|
E.
Design principles for the district. Design principles
in the Tower District are intended to create a contiguous system of
public spaces linked by pedestrian promenades. Buildings should be
created to accommodate a range of uses, including both public and
private spaces and they should have diverse facade features, with
clearly defined base, midsection and crown. An appropriate scaled
relationship between building coverage and block size will maintain
the desired character of the district.
F.
Buildings.
(1)
District context.
(f)
Setback.
[1]
Unless otherwise noted, front yard setbacks
shall include:
[a]
Main Street: N/A.
[b]
City street. All front yard setbacks
shall be a minimum 11 feet and a maximum 19 feet and shall be integral
to the sidewalk to create a minimum sidewalk of 20 feet.
[c]
District street. All front yard
setbacks shall be a minimum 11 feet and a maximum 19 feet and shall
be integral to the sidewalk to create a minimum sidewalk of 20 feet.
[3]
Side and rear setback shall be a minimum zero.
(2)
District character.
(a)
Facade composition.
[6]
Vehicular entrances shall be a maximum 11 feet
wide.
[8]
Vehicular entrances that consist of loading
docks/service bays shall be enclosed with garage doors, integrated
into the building facade and not extend beyond the top of the first
floor. The garage door shall be recessed from the plane of the facade
between three feet and five feet and shall be a minimum of 20% translucent.
[11]
Facade lighting shall conform to Illumination
Engineers Society of North America (IESNA) guidelines.
[12]
Vehicular entrance lighting shall conform to
Illumination Engineers Society of North America (IESNA) guidelines.
(c)
(e)
Material and color.
G.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall be located underground
where building coverage exceeds 10,000 square feet.
[4]
Pedestrian access to underground parking shall
be integral to the building.
[5]
Mechanical equipment for underground parking
shall be integral to the building.
[6]
Light level at the entrance to underground parking
shall conform to Illumination Engineers Society of North America (IESNA)
guidelines.
[7]
Surface parking is permitted where building
coverage is 10,000 square feet or less.
[8]
Surface parking lot shall not exceed 3,000 square
feet including aisles.
[9]
Surface parking shall be located in the rear
yard, be hard surfaced, and curbed.
[10]
Surface parking shall not be located at intersecting
city streets.
[11]
Surface parking shall be accessed from district,
neighborhood or alley streets.
[12]
Lighting levels shall conform to Illumination
Engineers Society of North America (IESNA) guidelines.
(b)
Parking lot.
[1]
Parking lots shall not be located at intersecting
city streets.
[5]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[10]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
(2)
Additional amenities.
(a)
Drive-throughs.
[1]
Drive-throughs, including all queuing and additional
facilities, shall be located interior to buildings.
(c)
Plaza/forecourt.
[1]
Entrances into the plaza/forecourt shall be
provided on all street frontages; entrances shall be a minimum of
10 feet wide.
[3]
Plaza/forecourt shall be concrete or modular
unit paving.
[7]
Plazas shall be illuminated and shall conform
to Illumination Engineers Society of North America (IESNA) guidelines.
H.
[2]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
[2]
Editors Note: Former Subsection H, Noise level performance
criteria, was repealed 9-21-2010 by Ord. No. 2010-323, which ordinance
also redesignated former Subsection I as Subsection H.
A.
Purpose of the district. The primary purpose of the
design criteria for the Cascade-Canal District is to:
(1)
Preserve and enhance the existing heritage qualities
of the area.
(2)
Allow existing warehouse and industrial style buildings
to adapt to a variety of uses and function.
(3)
Promote a pedestrian-scaled environment and create
well-defined street edges with mid-block connections.
(4)
Strengthen connections to Main Street and the riverfront.
(5)
Promote the district as an enclave which expresses
an rich warehouse/industrial quality; build upon and draw from the
quality of the Cascade redevelopment area.
B.
District boundaries and definition. The boundaries
for the district were determined by identifying the extent of the
warehouse/industrial character of the CCD and the practical opportunities
for enhancing the area as described above. The district extends north
of the Inner Loop to include Frontier Field and surrounding character
lands.
C.
Design character of the district. The design intent
for this district preserves and promotes its industrial warehouse
character and creates a pedestrian-scaled enclave. The design character
is typified by two- to five-story, horizontal box-like buildings with
flat rooflines. Facades are composed of dominant vertical columns
and strong horizontal bands which divide translucent glass panels.
Buildings have zero setback along street frontages to create a strong
sense of enclosure and an appropriate pedestrian scale. A pedestrian-oriented
alleyway system is created through the district with minimum side
and rear yard setbacks. This pedestrian system links streets and allows
for integrated connections to adjacent districts.
D.
Design Checklist. The following chart lists the design criteria and the deviations that require major site plan or minor site plan review. Applications that are within acceptable tolerances, and otherwise meet all design criteria, do not require site plan approval unless such approval is required pursuant to the other site plan thresholds as listed in § 120-191 of this chapter.
Design Checklist - Cascade-Canal District
| |||
---|---|---|---|
Design Criteria
|
Major Deviation
|
Minor Deviation
|
Minor Tolerance
|
BUILDINGS
| |||
Building form and mass
|
X
| ||
Minimum lot frontage
|
X
| ||
Maximum building length and depth relative to block
|
X
|
10%
| |
Minimum and maximum building height
|
X
| ||
Length to height ratio
|
X
|
20%
| |
Orientation to street frontage
|
X
| ||
Front setback
|
X
| ||
Side and rear yard setback
|
X
| ||
DISTRICT CHARACTER
| |||
Building maintains horizontal alignment
|
X
| ||
Facade composition
|
X
| ||
Equal street frontage facades
|
X
| ||
Vehicular entry location and garage door recessed and translucent
|
X
|
20%
| |
Service bay depth
|
X
| ||
Facade lighting
|
X
| ||
Facade window coverage
|
X
|
10%
| |
Window height to width ratio
|
X
|
20%
| |
Divided window openings
|
X
| ||
Window translucency
|
X
|
20%
| |
Window recess
|
X
|
30%
| |
Basement window width
|
X
| ||
Entrances on street frontage
|
X
| ||
Entrance elevation
|
X
| ||
Entrance accent and translucency
|
X
|
20%
| |
Entrance lighting
|
X
| ||
Roofline
|
X
| ||
Roofline cornice
|
X
|
20%
| |
Rooftop mechanical/telecommunications equipment
|
X
| ||
Primary construction material of clay brick
|
X
|
10%
| |
Additional construction material
|
X
| ||
Number of colors
|
X
|
50%
| |
Location of refuse storage
|
X
| ||
Refuse storage details (enclosures, doors)
|
X
| ||
SIGNAGE
| |||
Number of building identification signs
|
X
| ||
Location of building identification sign
|
X
| ||
Size of building identification sign
|
X
|
20%
| |
Building identification sign materials
|
X
| ||
Building identification sign luminaries
|
X
| ||
Building identification sign graphics
|
X
| ||
Building identification sign colors
|
X
|
30%
| |
Business signs on kiosk
|
X
| ||
Address sign location
|
X
| ||
Address sign copy raised/recessed
|
X
| ||
Address sign materials
|
X
| ||
Address sign lighting
|
X
| ||
Heritage sign and location
|
X
| ||
Heritage sign material
|
X
| ||
Heritage sign information
|
X
| ||
Heritage sign size
|
X
|
20%
| |
Awning locations
|
X
| ||
Awning width
|
X
|
10%
| |
Awning height
|
X
|
10%
| |
Awning projection
|
X
|
10%
| |
Awning support/attachments
|
X
| ||
Awning material
|
X
| ||
Awning color
|
X
|
30%
| |
Awning copy size
|
X
|
20%
| |
Awning lighting
|
X
| ||
SITE
| |||
Building parking location and surfacing
|
X
| ||
Building rear yard parking access
|
X
| ||
Building rear yard parking lighting
|
X
| ||
Parking lot location
|
X
| ||
Parking lot access
|
X
| ||
Parking lot setback
|
X
| ||
Parking lot surfacing and curbing
|
X
| ||
Parking lot aisle orientation
|
X
| ||
Parking lot wall material
|
X
| ||
Parking lot wall height
|
X
| ||
Parking lot wall pedestrian openings
|
X
|
10%
| |
Parking lot landscaping to shade area
|
X
|
20%
| |
Parking lot wall columns
|
X
|
10%
| |
Parking lot wall relief
|
X
|
20%
| |
Parking lot wall column height
|
X
|
10%
| |
Parking lot lighting height
|
X
|
10%
| |
ADDITIONAL AMENITIES
| |||
Drive-through setback and location
|
X
|
10%
| |
Wall setback
|
X
| ||
Wall height
|
X
|
10%
| |
Wall materials
|
X
|
E.
Design principles for the district. The design principles
for the Cascade-Canal District creates a pedestrian-scaled enclave
adaptable to a wide range of uses and functions. The historic character
of the district should be enhanced and preserved. Greenway linkages
should be established and connections to the riverfront should be
strengthened. Impacts of the Inner Loop should be alleviated through
design.
F.
Buildings.
(1)
District context.
(a)
Building form and mass.
[1]
Buildings shall be horizontal and longer in
length than depth along the street.
(c)
Height.
[1]
Unless otherwise noted, buildings heights shall
include:
(4)
District character.
(a)
(5)
Signage.
(a)
Building identification signage.
[5]
Sign materials shall include any of the district
building materials, wood and metal.
[6]
Sign luminaires shall conform to the facade
lighting.
[7]
Sign graphics shall be raised or recessed copy.
[8]
Signs shall include no more than three colors.
[9]
Signs may be painted onto facades fronting alley
streets.
(b)
Business signage.
[1]
Signage shall be placed on a common kiosk at
each street building entrance and shall conform to street criteria.
(c)
(d)
G.
Site.
(1)
Parking.
(a)
Building parking.
[1]
Building parking shall not be located at intersecting
city streets.
[4]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines.
[5]
Parking luminaires shall be located on the building
and conform to the building lighting criteria. If additional lighting
is required, freestanding light fixtures shall conform to parking
lot lighting criteria.
(b)
Parking lot.
[1]
Parking lots shall not be located at intersecting
city streets.
[5]
Parking lots shall be hard surfaced and concrete
or granite curbed.
[14]
Lighting shall conform to Illumination Engineers
Society of North America (IESNA) guidelines and shall be maintained
from dusk to dawn.
H.
[1]District plant materials. The plant materials shall conform
to the Forestry Master Plan. Trees shall adhere to the following:
(1)
Viability: winter hardy, suitable for urban conditions
of shade, air quality, desiccation and soil and space limitations
as found on the particular site, resistant to blight and pests.
(2)
Public health and safety: thornless, no tap roots,
no weak or brittle wood and no invasive weed species.
(3)
Design character: mature size and shape suitable for
the space available, tall canopy trees for wide streets and large
sites, small or columnar trees for narrow streets and small sites,
multiple seasons of special interest (in leaf, in blossom, fall color,
bark or branching pattern) and/or harmony with the dominant character
defining tree association of the area.
(4)
All proposed street trees and work related to street
trees shall conform to the Standards and Specifications for Street
Tree and Public Tree Work.
[1]
Editors Note: Former Subsection H, Noise level performance
criteria, was repealed 9-21-2010 by Ord. No. 2010-323, which ordinance
also provided for the redesignation of former Subsection I as Subsection
H.