No part of any billboard shall exceed 70 feet above
the ground level at the base of the proposed sign, which ground shall
not be disturbed from its natural condition.
The sign area shall not exceed 600 square feet per
sign face, nor shall any sign face exceed a vertical dimension of
25 feet nor a horizontal dimension of 60 feet.
Any highway billboard shall be constructed so
that the advertising surfaces of the highway billboard are oriented
in a manner that advertising on both sides of the structure are as
perpendicular to I-95 as possible. The widest part of the sign structure
shall face I-95. The highway billboard structure shall be painted
in a dull gray/blue finish, or in such other color as the Planning
Board determines will be most effective in reducing the visual impact
of the structure on the surrounding area.
Lighting for a highway billboard shall be designed
so as to preclude glare and light spillover to any residential dwelling
within 1,000 feet of the proposed sign. If it is determined by the
Planning Board's Engineer that the proposed lighting of a sign does
affect dwellings within 1,000 feet, the sign shall incorporate a device
capable of turning off all lighting until two hours before sunrise
as determined by the National Weather Service under NOAA.
No sign under this article shall include revolving,
blinking, flashing, sequential type lighting or similar type of lighting.
Lighting used to provide time, date or temperature and occupying less
than 20% of the area of the sign is permitted.
If the Planning Board requires a determination
as to the impact of any proposed lighting, the analysis shall be conducted
by a qualified professional retained by the Board and paid by an escrow
fund to be provided by the applicant.