All piping, traps and fixtures of a plumbing system or installation
of electrical fixtures hereafter installed shall be inspected by the
inspector to ensure compliance with all the requirements of this code
and the installation and construction of the system in accordance
with approved plans and permit, for which inspection a fee shall be
collected from the plumber according to the following schedule:
A. For residential construction, a fee as set forth in Chapter
A224, Fees. Such fee shall include all other items in the schedule herein.
B. For commercial construction, there shall be a fee as set forth in Chapter
A224, Fees, for inspection of up to three fixtures. For each fixture over three, there shall be an additional charge as set forth in Chapter
A224, Fees.
The equipment, material, power and labor necessary for the inspection
and test shall be furnished by the plumber or electrician.
The tests shall be made separately as follows:
A. The house drain, including all piping to the height of 20 feet above
the highest point of the house drain, except the exposed connections
to fixtures.
B. The soil, waste, vent and drainage pipes which would be covered up
before the building is enclosed or ready for completion.
C. The final smoke test of the whole system.
No plumbing or electrical system nor part thereof shall be covered
until it has been approved as herein prescribed.