Landscaping application for site plan and subdivision approval shall include a separate, detailed plan, drawn to a scale of no less than one inch equals 50 feet of all proposed landscaping, buffering, screening and existing trees to remain and be removed in accordance with Chapter
234, Trees, Article
II, Tree Preservation and Removal, provided that with respect to applications for subdivision approval, such information shall be limited to the rear and side yards of the proposed lots to be created, and all of the following items:
A. Plant listing, including:
(1) All plant material to be used shall be keyed to plans
and defined by botanical and common name.
(3) Size of material to be planted.
(4) Ultimate sizes of each plan and times to reach maturity.
(5) Characteristics, i.e. fall color, flowering, ornamental
factors.
(6) Plant delivery method, i.e. container, bailed and
burlapped.
B. Information required for design shall include:
(1) Location, species and height of all existing plant
material to remain on site, excluding ground cover, but including
all trees. In addition, with respect to such trees, there shall be
provided the diameter width of each tree measured at a point on the
tree four feet above the ground level.
(2) The designation and location of all plant material
to be installed in any buffer zone, buffer area or buffer strip.
(3) Location and spacing of each plant to be planted,
shown to scale.
(4) Methods to be used in welling, staking and guying, mulching and wrapping according to any Borough standards as may be established by the Borough Code Chapter
234, Trees, Article
I, Shade Trees.
(5) Ground covers to be used in design, which may be indicated
as a mass planting, but spacing must be defined in the plant list.
(6) A means of screening utility boxes using evergreen
plant material where they appear at ground level.
C. Name, signature, seal and address of person, firm
or organization preparing landscape plans.
D. Placement and size of street trees shall be indicated along all thoroughfares in accordance with Borough shade tree specifications as provided by Borough Code Chapter
234, Trees, Article
I, Shade Trees, §
234-4D.
E. Existing soil type and condition.
The following procedures shall be implemented
with respect to the protection of existing plantings:
A. A four-foot high standard wood snow fence as a physical
barrier shall be installed at the dripline of each plant or group
of plants, being a line connecting the tips of the outermost branches
of a plant or tree projected vertically to the ground, that are to
remain on the site and last until construction is completed.
B. Barriers shall not be supported by the plants they
are protecting but shall be self-supporting.
C. No soil shall be deposited or removed within the dripline
or within eight feet, whichever is greater, of any existing tree trunk.
The following procedures shall be implemented
with respect to the grading of land near trees:
A. The grade of land located along the dripline shall
not be raised or lowered more than six inches unless compensated for
by welling or retaining wall methods and in no event be less than
eight feet from the trunk.
B. Tree wells. For existing trees the well shall be the
size of the tree. Wells are to be constructed of suitable materials
which shall include boulders, decorative concrete block (but not cinder
block or masonry units), railroad ties or other suitably treated lumber,
or reinforced, poured concrete. Any well wall four feet or greater
in diameter shall be designed by a licensed engineer with calculations
provided. Tree well details are to be filed and inspected to determine
specifications on a case-by-case application.
C. Retaining walls. Retaining walls are to be constructed
around each tree or group of trees immediately after grade is lowered.
Any retaining wall is to be constructed of a suitable material which
shall include the same materials permitted for tree wells. Design
calculations, which have been signed and sealed by a professional
engineer, shall be submitted to the Borough Engineer for review and
approval prior to construction. The retaining walls shall be located
after a field inspection to determine the location of the wall to
ensure maximum survivability.
D. Clearing near tree trunks. Any clearing within the
dripline of a tree shall be done by hand. No equipment shall be driven
over any such area, and no building materials shall be stacked against
any trees or within the area of the barrier to any trees.
E. Trees shall not be used as supporters or for stockpiling.
No tree shall be used to support any scaffolding, signs, temporary
utilities or any other device. Topsoil shall be stockpiled in an area
outside of the dripline from any tree designated to remain.
The following specifications shall be followed
for the planting of new trees and shrubs.
A. Only first quality, nursery-grown plant materials
which conform to the standards of the American Association of Nurserymen
shall be acceptable for planting.
B. Prior to the installation of all plant material, the
results of physical and chemical tests of the subsoil and topsoil
shall be submitted to the Borough Engineer to assess soil composition
and for determination whether the pH of the soil is acceptable for
proposed planting.
C. Trees and shrubs shall be planted only when the soil
is frost-free and friable.
D. All plant material shall be guaranteed for one year
from date of planting.
E. The use of and planting of bare root material shall
be prohibited.
F. All plant material shall be planted so that the top
of the root ball is no higher or lower than the existing, finished
grade dependent upon soil conditions.
G. Minimum size of material at time of planting shall
be 2 1/2 inches in diameter for shade trees, measured at a point
of the tree four feet above the ground level; five feet to six feet
in height for evergreens and ornamentals; and 18 inches to 24 inches
in height or spread for shrubs.
H. Upon the establishment of plant material at a site
(which shall require a minimum of one growing season), all stakes,
guying, tree wrapping, and saucers shall be removed.
I. The use of nylon twine on the root balls of proposed
plant material is prohibited. All burlap shall be pulled back 1/3
at time of planting.
The following specifications shall be met for
the planting of ground covers and the use of mulch:
A. All planting beds shall be mulched. The type of mulch
to be used shall be noted on the site plan or landscaping plan. The
minimum required depth of placement is three inches but shall not
exceed four inches. A NJDEP approved chemical pre-emergence selective
herbicide and/or a permeable landscape fabric shall be used to reduce
weed growth. Any chemical or chemicals to be used shall be specified
on the site plan or landscaping plan and used according to directions.
B. Suitable ground covers shall be installed in place
of grass in small and restricted areas, such as tree and shrub beds
and planters. The following ground covers are suitable for use: ivy,
pachysandra, myrtle, yellowroot, wintercreeper, Bar Harbor juniper,
memorial rose, perennials, wildflowers and hardwood mulch.
The following design specifications shall apply
to the landscaping of parking lot islands:
A. Where parking islands are to be planted, they shall
be a minimum width of six feet from the interior edge of curb to curb.
B. Parking islands are permitted in any parking lot but
shall be required in all parking lots providing for more than 30 parking
spaces. Planted islands shall be provided within parking areas at
a ratio of one island per 30 parking stalls.
C. All single-parking curbed island planters shall be
a minimum size of six feet by 20 feet and double-parking curbed island
planters shall be a minimum of six feet by 40 feet. The minimum depth
of acceptable backfill in such planters shall be two feet for shrubs
and four feet for trees, unless poor drainage conditions exist, upon
which modifications are permitted.
The following procedures shall be implemented
with respect to the planting of all landscaping:
A. All plant materials shall be installed on the site
or subject property in accordance with an approved landscaping plan
or site plan.
B. Staking. All trees shall be staked in the following manner, in accordance with Borough Code Chapter
234, Trees, Article
I, §
234-4D(7): Stakes shall be driven into the ground to a depth of two feet before backfilling. Trees shall be guyed to the stakes by means of wire and rubber hose or its equivalent and shall be fastened in such a manner that the tree trunk shall not come in direct contact with the wire.
C. Wrapping. Each tree shall be wrapped with an expandable
paper or cloth treated to last at least one year, which wrap shall
extend from the ground level up to the trunk to the first branches.
Said wrap is to prevent sunscald and shall be attached or fastened
at each end with a material that will permit tree growth without girding.
D. Saucers.
(1) A ring of packed soil shall be placed around the finished
planting hole of each tree, which shall be a minimum of six inches
higher than the finished grade.
(2) Saucers placed on slopes shall be level at the top
end and perpendicular to the tree trunk.
(3) Saucers are to be designated to catch and hold the
maximum amount of water, either from natural precipitation or irrigation.
E. Mulching.
(1) A three-inch minimum to four-inch maximum layer of
mulch shall be applied around each individual or group of trees and
shrubs.
(2) Mulch shall be a shredded organic material which is
not readily subject to movement by wind or water.
(3) The use of untreated new wood chips and marble and
stone chips is prohibited.
F. Edging. In order to delineate planting beds and reduce
bed maintenance, a physical edging of steel or other durable material
with the minimum dimensions of four inches by 1/8 shall be installed
flush with grade where planting areas abut turf areas.
In connection with a landscaping plan submitted
as part of a site plan application, bonds shall be required in accordance
with the provisions of N.J.S.A. 40:55D-53a(1).