[R.O. 2012 §500.050; Ord. No. A-7084 §1, 10-26-2001; Ord. No. A-7086 §1, 10-26-2001; Ord. No. 8045, 5-20-2011; Ord. No. 8514, 4-20-2017; Ord. No. 8904, 3-21-2022]
A certain document, one (1) copy of which is on file with the City Building Official, being marked and designated as the International Plumbing Code (2018), including applicable Appendix Chapters, as published by the International Code Council, be and is hereby adopted as the Code of the City of Monett, Missouri, for regulating the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use or maintenance of plumbing systems in the City of Monett and providing for the issuance of permits and collection of fees therefore; and each and all of the regulations, provisions, conditions and terms of such International Plumbing Code, 2018 Edition, published by the International Code Council on file in the Office of the Building Official, and hereby referred to, adopted and made apart hereof as if fully set out in the Section with the additions, insertions, deletions, and changes, if any, prescribed in Section 500.060 of this Article.
[R.O. 2012 §500.060; Ord. No. A-7084 §1, 10-26-2001; Ord. No. A-7086 §2, 10-26-2001; Ord. No. 7668, 6-20-2006; Ord. No. 8045, 5-20-2011; Ord. No. 8514, 4-20-2017; Ord. No. 8904, 3-21-2022]
The following Sections are hereby revised:
Section 101.1 Insert: The City of Monett, Missouri.
Section 106.6 thru 106.63 Shall be deleted in its entirety.
Section 108.4 Insert: Misdemeanor, five hundred dollars ($500.00), one hundred (100) days.
Section 108.5 Insert: Five hundred dollars ($500.00), Applicable Court Cost and Fees.
Section 303.2 Materials of Construction. Insert: Notwithstanding any other provisions of this code, connection of PVC water service lines to water meter yokes shall not be by means of threaded PVC connectors, but shall be by means of threaded brass nipples and PVC compression-type adaptors. Connection of buildings to City sewer mains shall be by means of Schedule 40 PVC pipe in minimum four (4) inch size.
Section 305.4.1 Insert: Twelve (12) inches.
Section 903.1 Insert: Twelve (12) inches.