The Town of Brant is hereby divided into the
following types of districts:
|
R-R
|
Rural Residential
|
|
R-1
|
Medium-Density Residential
|
|
R-2
|
Seasonal Residential
|
|
C
|
Commercial
|
|
I
|
Industrial
|
|
A
|
Agricultural
|
Said districts are bounded and defined as shown
on a map entitled "Zoning Map, Town of Brant, Erie County, New York."
Said Zoning Map shall show the effective date of this chapter and
of each subsequent amendment to said map and shall be duly certified
by the Town Clerk.[1]
[1]
Editor's Note: The Zoning Map is on file at
the office of the Town Clerk, where it may be examined during regular
office hours.
The Zone Map, which shall be a part hereof,
shall be duly certified in the manner prescribed by the laws of the
State of New York relating to town zoning.
The Zone Map, when duly certified, shall be
filed in the office of the Town Clerk and with the Board of Appeals.
All amendments which shall be made at any time
shall be filed with the abovementioned Clerk and Board.
The boundaries of each of the created districts
or zones are hereby established as shown on the Zone Map, Town of
Brant, which map accompanies and is hereby declared to be a part of
this chapter.
The district boundary lines are intended generally
to follow street lines, existing lot lines or their projections or
corporate boundary lines as indicated on the Zone Map, but where a
boundary line does not follow such a line, its position is shown and
described on said map.
The Schedule of Use, Area, Lot and Bulk Requirements
enclosed herein is made a part of this chapter.[1] The regulations included in said schedule are hereby established
as minimum regulations of this chapter; municipal facilities deemed
necessary and appropriate by the Town Board are hereby exempted from
such area and bulk requirements.
[1]
Editor's Note: The Schedule of Use, Area,
Lot and Bulk Requirements is located at the end of this chapter.
