A.
An application for development of a lot or parcel of
land for mobile home park purposes shall be made and approved or approved
as modified before any permit for such use shall be issued.
In addition to the requirements contained in Article III of Chapter 320, Subdivision and Land Development, an application for preliminary or final approval of a mobile home park shall indicate by drawings, diagrams, maps, text, affidavit or other legal instrument, the following:
A.
That the parcel or lot for which application is made
is held in single and separate ownership.
B.
The placement, location and number of mobile home lots
and mobile home pads on a layout map of the parcel at a scale of one inch
equals 50 feet.
C.
The location and dimension of all parking facilities.
D.
The locale, dimension and arrangement of all areas to
be devoted to lawns, buffer strips, screen planting and recreation.
E.
Location of all existing tree masses and trees of over
six-inch caliper.
F.
Proposed provisions for street and on-site lighting.
G.
Plans for the community fuel supply system showing the
location, depth, slope, size, material and planned delivery pressure of all
necessary mains and laterals for connection of individual mobile home lots,
and any permanent structure designed to serve park residents, to the central
fuel storage facility. Manholes, pressure regulating valves, and storage tank
locations shall also be indicated on this plan.
H.
Plans for the electrical distribution system showing
the location and depth of all necessary primary and secondary distribution
lines for connection of individual mobile home lots, and any permanent structures
designed to serve park residents, to the electrical utility service entry
point. The planned current and voltage loads to be carried by each distribution
line shall be indicated. The type and gauge of wire and the type of conduit
into which each line is to be installed shall be indicated. Location of transformers,
overcurrent protection devices, disconnect devices and system grounding points
shall also be indicated.
I.
Plans for the telephone and master television antenna
system showing the location and depth of all necessary distribution lines
for connection of individual mobile home lots, and any permanent structures
designed to serve park residents to the telephone service entry point or the
master television antenna. The locations of any transformers, repeater stations
or secondary distribution panels shall also be indicated.
J.
Plans of a typical mobile home pad showing the size of
the pad, its construction, the location of utility connections, the location
of the on-site fuel storage area if a central fuel distribution system is
not provided, the location and construction of anchors used to secure the
mobile home against overturning forces.
K.
Plans for any and all permanent structures within the
mobile home park, including the following data:
(1)
Foundation plan. Showing the dimensions, wall thickness
and all construction involved.
(2)
General floor plan. Plans of all building floor areas
indicating purpose and showing locations of partitions, windows, doors and
equipment.
(3)
Elevations. Typical elevations of proposed buildings
showing exterior design, materials, windows and doorways. General elevations
must show all sides of buildings, window and door outlines, existing and finish
grades, floor elevations, roofs, attic vents, and any parapets, gutters, and
downspouts.
(4)
Mechanical. Design data of heating and cooling systems
showing all necessary heaters, boilers, pumps, motors, compressors, fans,
pipes, ducts, equipment and construction for proposed buildings. Electrical
drawings showing outside service, panels, outlets, switches, light fixtures,
and all wiring to motors and power equipment. Main distribution to electrical
systems must be shown as well as special mechanical installations such as
vertical transportation and ventilating systems.
L.
Rules and regulations adopted by the park owner governing
the daily operation of the park and the conduct of the park residents.
