Sketch plan requirements shall be as follows:
A. All maps: title, scale, north arrow, and date.
B. Site map: should be on a topographical survey map
as required for the preliminary plan or an enlargement of the most
recent USGS quadrangle to a scale of one inch to 200 feet and showing
contours at intervals of not more than 10 feet; may be a freehand
sketch on a print of such a map; must have:
(2) Park and recreation areas, if proposed.
(3) Names of owners and approximate boundaries of all
contiguous properties more than one acre in area.
C. Development data.
(1) Land characteristics of the site.
(2) Availability of existing and proposed utilities, schools,
parks and playground.
(3) Total acreage of subdivision and number of lots proposed.
(4) Typical width and depth of lots.
(5) Building types and approximate square feet of living
area in dwelling.
D. Legal date.
(1) Name and address of subdivider.
(2) Name and address of owner.
Preliminary plan requirements shall be as follows:
A. All maps: title, scale, North arrow and date.
B. Site map.
(1) Sheet size. Size of subdivision sheet size scale and
scale:
|
Size of Subdivision
|
Sheet Size
|
Scale
|
---|
|
Less than 10 acres
|
17 inches by 22 inches
|
1 inch = 50 feet
|
|
Ten or more acres
|
20 inches by 40 inches
|
1 inch = 100 feet
|
(2) Bearings and distances of tract boundary lines and
reference to control points.
(3) Location and dimensions of existing and proposed:
(a)
Streets, public facilities or land, easements,
and similar features.
(b)
Facilities or land dedicated or reserved for
public use.
(c)
Utilities on and adjacent to the tract, including
invert elevation of sanitary, storm, and combined sewers of water
mains; gas lines, fire hydrants, electric and telephone facilities,
and streetlights; invert elevation of sewers at proposed points of
connection; direction and distance of sewers not adjacent to tract
to which connections are proposed and invert elevations at points
of connection.
(4) Topography:
(a)
For land with average slope less than 2%, contour
lines at not more than one-foot intervals.
(b)
For land with average slope 2% to 10%, contour
lines at not more than two-foot intervals.
(c)
For land with average slope exceeding 10%, contour
lines at not more than five-foot intervals.
(d)
Datum plane for all topographic information
to be that of the U.S. Geological Survey.
(5) Location of percolation test sites if required.
(6) Names or numbers of:
(a)
Owners of adjoining land.
(e)
Blocks and lots in accordance with Town of Cicero
numbering system.
C. Location and neighborhood maps.
(1) Neighborhood map must have:
(a)
Subdivision location and boundaries.
(b)
Location of adjoining tracts and subdivisions
and existing and planned streets, public facilities, watercourses
within 400 feet of any part of the subdivision.
(c)
Scale of one inch equals 400 feet to one inch
equals 2,000 feet.
D. Development data.
(1) Corrected and updated development data from sketch
plan or as required by sketch plan.
(2) Results of any percolation tests.
(3) Drawings showing:
(a)
Tentative street cross-sections and center-line
profiles.
(b)
Preliminary sketches of any bridges or culverts.
(c)
General feasibility of sewer design and stormwater
drainage.
(4) Time schedule of operation.
E. Legal data.
(1) Draft of restrictions of all types which will run
with the land and become covenants in the deed for lots.
(2) Draft of offers of cession as required.
F. Stormwater pollution prevention plan: a stormwater pollution prevention plan consistent with the requirements of Chapter
179 of the Code of the Town of Cicero.
[Added 12-10-2007 by L.L. No. 18-2007]
Final plat requirements shall be as follows:
A. All maps: title, scale, North arrow, and date.
B. Site map.
(1) Same sheet size and scale as preliminary plan.
(2) Ink drawing on stable plastic base film or a transparent
reproduction with black line on stable base plastic film.
(3) Corrected and final planimetric data from preliminary
plan, except as modified below:
(a)
For all street right-of-way and property lines
the following shall be shown:
[1]
Accurate dimensions, bearings or deflection
angles of all straight lines; except interior parallel lines bound
by outermost parallel lines which are prescribed by dimensions and
bearings; error of closure may not exceed one foot in 5,000; and
[2]
Radii, arcs, and central angles of all curves.
(b)
For other rights-of-way and easements, the name,
bearings and width are required.
(4) Survey data: primary control points, or descriptions
and ties to such control points to which all dimensions, angles, bearings,
and similar data on map are referred.
(5) Information beyond subdivision boundary required for
preliminary plan need not be shown except for boundary streets.
C. Location and neighborhood maps.
(1) Corrected and updated from preliminary plan.
(2) If final plat is drawn in two or more sections, locations
of the areas should be indicated.
D. Development data.
(1) Corrected and updated development data from preliminary
plan.
(2) Detailed drawings and specifications for:
(a)
All improvements shown on preliminary plan development
data drawings.
(b)
Sanitary sewage disposal system.
E. Legal data.
(1) Corrected and updated legal data from preliminary
plan.
(2) Such other certificates, affidavits, endorsements,
or agreements as may be required by the Planning Board in enforcement
of these regulations.
F. Grading plan: existing and proposed contours at two-foot
contour intervals with spot elevations at all lot corners and intersections
of front building line and side property lines, road intersections
and changes in road grades.
[Added 3-24-1975]
G. Stormwater pollution prevention plan: a stormwater pollution prevention plan consistent with the requirements of Chapter
179 of the Town Code of the Town of Cicero.
[Added 12-10-2007 by L.L. No. 18-2007]