The R-3 Single-Family Residential District is to be mapped in newly developing parts of the Village. In particular this district is suitable for developments containing larger than average structures.
Uses permitted in the R-1 Residential District.
Special uses permitted in the R-1 Residential District.
A. 
Minimum lot area: 20,000 square feet.
B. 
Minimum lot width: 100 feet.
C. 
Minimum yards:
(1) 
Front: 40 feet.
(2) 
Rear: 20% of the depth of the lot.
(3) 
Side: There shall be a side yard on each side of a building of a minimum of 15% of the width of the lot, provided that such a required yard need not exceed 15 feet.
(4) 
Except that building setback lines shall also observe the standards contained in Article XXV.
D. 
Maximum lot coverage for all buildings: 30%.
[Amended 3-17-1986 by Ord. No. 803]
E. 
Maximum height: 40 feet.
A. 
Minimum yards.
(1) 
Side: 15 feet.
(2) 
Rear: 15 feet.
B. 
Maximum lot coverage for accessory buildings: 5%.
A. 
Minimum lot area: 45,000 square feet.
B. 
Minimum lot width: 150 feet.
C. 
Minimum yards:
(1) 
Front: 40 feet.
(2) 
Rear: 20% of the depth of the lot.
(3) 
Side: There shall be a side yard on each side of a building of a minimum of 20% of the width of the lot, provided that such a required yard need not exceed 30 feet.
(4) 
Except that building setback lines shall also observe the standards contained in Article XXV.
D. 
Maximum lot coverage for all buildings: 25%.
E. 
Maximum height: 40 feet.
In accordance with Article XXII.
In accordance with Article XXIII.