Connection of new installations. Every new installation
of a plumbing system in a building or structure shall, when there
is an accessible public sewer in the street abutting the lot on which
such building or structure is located, be connected with such sewer,
as provided in this section.
Connection of existing installations. The plumbing
system of an existing building or structure located on a lot abutting
on a street in which a public sewer is being placed or has been placed
after such plumbing or drainage was installed shall, whenever directed
by the Plumbing Inspector, be connected to such public sewer.
Each plumbing system of a building or structure
shall be separately connected with the public sewer or with a private
sewer or cesspool.
No connection shall be made to a public sewer or any
sewer system except by special permit from the Plumbing Department
and under the direction and supervision of the Plumbing Inspector.
No permit for a sewer connection shall be issued unless
the plumbing system conforms with the Plumbing Code. This is not to
be construed as applying to work performed prior to the date on which
this code becomes effective.
No direct or indirect connection for the removal of
sewage from any premises shall be made with the stormwater drainage
of the towns or with a stream or watercourse.
All connections with a public sewer shall be made
only after the issuance of a permit, unless such requirement is waived
by resolution of the Village Board.