General site plan and engineering specification
requirements (two sets on paper and one set on linen) shall be as
follows:
A. Must bear the stamp of an architect or engineer, licensed
by New York State.
B. Scale must be not less than one inch equals 50 feet.
C. Sheet size.
(1) Maximum: 30 inches by 40 inches.
(2) Minimum: as reasonable scale dictates.
D. Title block.
(1) The name of the development.
(2) The post address of the development.
(3) The name and address of the developer.
(4) The name and address of the owner.
(5) The name, address, license number, seal of the professional
engineer or architect who prepared the plans.
(6) The date(s) of original and subsequent submissions,
if any.
(7) The true or magnetic North and date taken.