[Adopted 7-5-1972 by Ord.
No. 1-72]
Any and all roads to be hereinafter accepted as part of the
Town road system shall be required to meet the following specifications:
A. Minimum right-of-way shall be four rods.
B. Minimum width of roadbed shall be 30 feet.
C. Minimum width of hard surface (bituminous) to be 20 feet, over a
gravel base of 1,000 yards per mile, for an average depth of four
inches.
D. Such bridges and/or culverts as deemed necessary by the Town Board
shall be installed.
E. All dead-end roads shall have a sixty-foot diameter cleared turnaround
area.
F. All cuts and fills shall have no less than a one-to-one grade.
G. All roads shall meet approval by inspection of the Town Board and
the County Highway Dept.
H. Roadways shall be stumped and brushed to a width of 40 feet.
[Added 7-5-1973]
I. The maximum grade on hills shall be 8% to 11%.
[Added 7-5-1973]
J. Minimum width of surface area shall be 24 feet over a minimum of
four inches compacted gravel base.
[Added 7-5-1973]
K. No stumps or brush shall be allowed to be buried within the right-of-way.
[Added 7-5-1973]
L. Proper culverts on all watercourses.
[Added 7-5-1973]