106.1 General: The construction documents for new construction,
alteration, repairs, expansion, addition or modification for buildings
or structures shall be prepared by a registered design professional.
All construction documents shall be prepared by the appropriate registered
design professional consistent with the professional registration
laws of the State of Missouri. The construction documents shall include
the name and address of the registered design professional and shall
be signed, sealed and dated by the registered design professional
in accordance with Section 106.1.2, except:
| |
(1)
|
Construction documents for single-family dwellings that are
designed by and signed by the owner of the proposed building, unless
the code official determines that a registered design professional
is needed to assure a safe construction design. Such buildings shall
be built for the exclusive occupancy by the owner for a period of
at least one (1) year.
|
(2)
|
Miscellaneous structures related to buildings of the "R-3" use
group such as room additions, carports, garages, sheds and other similar
structures unless the code official determines a registered design
professional is needed to assure a safe construction design.
|
(3)
|
Work of a minor nature approved by the code official in accordance
with Section 105.2.
|
Application of Seals: When construction documents are submitted
in accordance with Subsection 106.1, the application of seals and
signatures to those documents shall be required as follows:
| |
(1)
|
All construction documents submitted with an application for
a building permit shall bear an original embossed or wet ink seal
and original signature on the front sheet of each discipline within
each set of construction documents;
|
Or
| |
(2)
|
The registered design professional for each discipline shall
place his/her original seal and signature upon the cover sheet of
each set of construction documents.
|
In addition, all other sheets of the construction documents,
other than specifications or calculations, shall bear the original
embossed, wet ink, or mechanically reproduced seals of the registered
design professional. Any addenda or modifications submitted for changes
to the construction documents shall also bear an original seal and
signature by the registered design professional. Such changes shall
be clearly clouded.
|