Street name signs shall be placed at all street
intersections in such a position as to be readily visible to both
vehicular and pedestrian traffic in accordance with the New York State
Manual of Uniform Traffic Control Devices.
Sign posts shall be three-and-one-eighth-inch
hot-dipped galvanized flanged steel channel posts with three-eighths-inch
holes drilled on one-inch center. Posts shall be imbedded a minimum
of three feet zero inches below finished grade. The top of posts shall
be fitted with a manufactured two-sign bracket adapted to fit the
post. Post length shall be sufficient to provide a minimum clearance
of seven feet between the bottom of the lowest sign and the finished
grade.
A.
Street name signs shall be made of aluminum covered
with reflective material as manufactured by Scotchlite or approved
equal. The signs shall have white letters on a green background and
shall be readable from both sides.
B.
All signs shall conform to the standards of the New
York State Manual of Uniform Traffic Control Devices and shall be
subject to the approval of the Town Highway Superintendent.
