A.
Scale. The preliminary plan shall be at a scale of not more than
100 feet to the inch.
B.
Plan information. The preliminary plan shall show or be accompanied
by the following information:
(1)
Proposed subdivision name or identifying title.
(2)
North point, scale and date.
(3)
Name of the owner of the property.
(4)
Name of the registered engineer, surveyor or architect responsible
for the plan
(5)
Tract boundaries with bearings and distances.
(6)
Contours at vertical intervals of five feet or, in the case of relatively
level tracts, at such lesser interval as may be necessary for satisfactory
study and planning of the tract
(7)
Datum to which contour elevations refer. Where reasonably practicable,
data shall refer to known established elevations.
(8)
All existing watercourses, tree masses and other significant natural
features.
(9)
All existing buildings, sewers, water mains, culverts, petroleum
or petroleum product lines, fire hydrants and other significant man-made
features.
(10)
All existing streets on or adjacent to the tract, including
name, right-of-way width and pavement width.
(11)
All existing property lines, easements and rights-of-way, and
the purpose for which the easements or rights-of-way have been established.
(12)
Location and width of all proposed streets, alleys, rights-of-way
and easements; proposed lot lines with approximate dimensions; playgrounds,
public buildings, public areas and parcels of land proposed to be
dedicated or reserved for public use.
(13)
Wherever practicable, the preliminary plan shall show the names
of owners of all abutting unplatted land and the names of all abutting
subdivisions.
(14)
Where the preliminary plan covers only a part of the subdivider's
entire holdings, a sketch shall be submitted of the prospective street
layout for the remainder.
(15)
Copies of the proposed deed restrictions, if any, shall be attached
to the preliminary plan.
A.
Plan size and legibility.
(1)
The subdivision plan submitted for final approval shall be a clear
legible white print of an ink drawing.
(2)
Final plans shall be on sheets not larger than 34 inches by 44 inches
overall. It is recommended that, as far as practicable, final plan
sheets be held to the following overall sizes: 17 inches by 22 inches;
22 inches by 34 inches; 34 inches by 44 inches. Where necessary to
avoid sheets larger than the maximum size prescribed above, final
plans shall be drawn in two or more sections accompanied by a key
diagram showing relative location of the sections.
B.
Plan scale and required information.
(1)
The final plan shall be at a scale of not more than 100 feet to the
inch and shall include the following information:
(a)
Subdivision name or identifying title.
(b)
North point, scale and date.
(c)
Name of the record owner and subdivider.
(d)
Name and seal of the registered professional engineer or surveyor
responsible for the plan.
(e)
Boundaries of the tract.
(f)
Street lines, lot lines, rights-of-way, easements, and areas
dedicated or proposed to be dedicated to public use.
(g)
Sufficient data to determine readily the location, bearing and
length of every street, lot and boundary line and to reproduce such
lines on the ground.
(h)
The length of all straight lines, radii, lengths of curves and
tangent bearings for each street.
(i)
All dimensions and angles or bearings of the lines of each lot
and of each area proposed to be dedicated to public use.
(j)
The proposed building setback line for each street or the proposed
placement of each building.
(k)
Location and width of all private driveways.
(l)
Location, size and invert elevation of all sanitary, storm and
combined sewers and location of all manholes, inlets and culverts.
(m)
All dimensions shall be shown in feet and in hundredths of a
foot.
(n)
Lot numbers.
(o)
Names of streets within and adjacent to the subdivision.
(p)
Permanent reference monuments shall be shown and shall be as
specified by the Commission Engineer.
(q)
Wherever practicable, names of any adjoining subdivisions shall
be shown.
(r)
Wherever practicable, names of the owners of any unplatted land
shall be shown.
(s)
Certificate of dedication of streets and other public property.
(t)
Certificate for approval by the Commission.
(2)
The final plan shall include thereon or be accompanied by:
(a)
An affidavit that the applicant is the owner or equitable owner
of the land proposed to be subdivided.
(b)
A statement duly acknowledged before an officer authorized to
take acknowledgment of deeds and signed by the owner or owners of
the property to the effect that the subdivision as shown on the final
plan is made with his or their free consent and that it is desired
to record the same.
(c)
Certification by the State Department of Health when individual sewage disposal or water systems are to be installed as required by Article V of this chapter.
(d)
Certification by the Commission Engineer that the subdivider has met the requirements of Article V of this chapter.
(e)
Typical cross sections, street profiles and drainage details
for all streets. Such profiles shall show at least the following:
existing (natural) grade along the proposed street center line; existing
(natural) grade along each side of the proposed street right-of-way;
proposed finished center-line grade or proposed finished grade at
top of curbs; sanitary sewer mains and manholes; storm sewer mains,
inlets, manholes and culverts.
(f)
Protective covenants, if any, in form for recording.
