A. 
The sketch plat shall be based on tax map information or some other similarly accurate base at a scale conforming with an existing tax map, to enable the entire tract to be shown on one sheet, and shall show or include the following information:
(1) 
The location of that portion which is to be subdivided in relation to the entire tract.
(2) 
All existing structures, streams and other watercourses and wooded areas or areas of natural vegetation (native to Long Beach Island, such as holly, beach plum, bayberry, cedar, etc.) within the portion to be subdivided and within 200 feet thereof. The location of all structures both within the proposed subdivision and immediately adjacent to it shall be shown. The use of all buildings and land areas shall be indicated.
(3) 
The name of the owner and of all adjoining property owners as disclosed by the most recent municipal tax records.
(4) 
The tax map sheet, block and lot numbers of adjoining property.
(5) 
All existing or proposed streets or roads within or adjoining the subdivision, setting forth the names of said streets or roads and the right-of-way and cartway widths thereof.
(6) 
Distance in feet to nearest intersection.
(7) 
Dimensions of lots concerned.
(8) 
Arrow indicating direction of North.
B. 
The sketch plat shall be clearly and legibly drawn or reproduced by a licensed New Jersey professional engineer and/or land surveyor.
C. 
Any application to the Planning Board of the Borough of Beach Haven for subdivision approval for the construction of multifamily dwellings of three or more units or any commercial, industrial or institutional development for the utilization of 1,000 square feet or more of land must include a recycling plan. The plan must contain, at a minimum, the following:
[Added 9-14-2009 by Ord. No. 2009-20]
(1) 
A detailed analysis of the expected composition and the amount of solid waste and recyclables generated at the proposed development; and
(2) 
Locations documented on the application's subdivision that provide for convenient recycling opportunities for all owners, tenants and occupants. The recycling area shall be of sufficient size, convenient location and certain other attributes (signage, lighting, fencing, etc.) as may be determined by the Municipal Recycling Coordinator.
A. 
The preliminary plat shall be designed in accordance with the provisions of Article VIII of this chapter, in strict accord with modern and accepted planning techniques and procedures by qualified persons with the cooperation of the Planning Board and Division of Planning. The preliminary plat shall be clearly and legibly drawn or reproduced at a scale conforming with a tax map, by a licensed New Jersey professional engineer and/or land surveyor. For initial consideration by the Planning Board prior to the granting of tentative approval, the plat shall show or be accompanied by sufficient information to establish the design, arrangement and dimensions of streets, lots and other planned features as to form, size and location. This information shall form the basis for the general terms and conditions upon which tentative approval may be granted, and shall include:
(1) 
A key map showing the entire subdivision and its relation to surrounding areas.
(2) 
The tract name, tax map sheet, block and lot number, date, reference meridian, graphic scale and the following names, addresses and facts:
(a) 
Certification that the applicant is the owner of the land or his authorized agent, giving names and addresses of both.
(b) 
Name and address of the subdivider.
(c) 
Name and address of the person who prepared the map.
(d) 
Certificate from the Tax Collector that taxes are paid to date.
(3) 
Acreage of tract to be subdivided to nearest tenth of an acre.
(4) 
Sufficient approximate elevations and contours to determine the general slope and natural drainage of the land and the high and low points of all proposed new streets. Proposed contours shall be shown in dashed lines, with arrows indicating the direction of runoff. The proposed elevations at the corners of the lot and house and of the garage floor shall be shown.
(5) 
The location of existing and proposed property lines, streets, buildings, watercourses, railroads, bridges, culverts, drainpipes and any natural features.
(6) 
Plans, profiles and cross sections of all grading, paving, curbs, sidewalks, storm and sanitary sewers and appurtenances, water mains, gas mains, street signs, bridges, shade trees and showing connections to existing or proposed utilities and all meeting the requirements of the Borough Engineer.
B. 
Any subdivision or part thereof which does not meet with the established requirements of this chapter or other applicable regulations shall not be approved.
C. 
When the preliminary plat, which has been granted tentative approval, forms the basis upon which application for final approval will be made, such plat map and its accompanying engineering plans must be prepared by a licensed professional engineer and/or licensed land surveyor in compliance with all the provisions of Chapter 358 of the Laws of 1953, as amended and supplemented, before the required improvements of this chapter are installed or the performance guaranty for same is furnished, which requirements must be met before application and the granting of final approval of the plat can be made.
D. 
A copy of any protective covenants or deed restrictions applying to the land being subdivided shall be submitted with the preliminary plat.
The final plat shall be drawn in ink on tracing cloth at a scale of not less than one inch equals 50 feet and in compliance with all the provisions of Chapter 358 of the Laws of 1953,[1] as amended and supplemented. The final plat shall show or be accompanied by the following:
A. 
Date, name and location of the subdivision, name of owner, graphic scales and reference meridian.
B. 
Tract boundary lines, right-of-way lines of streets, street names, easements and other rights-of-way, land to be reserved or dedicated to public use, all lot lines and other site lines; with accurate dimensions, bearing or deflection angles, and radii, arcs and central angles of all curves.
C. 
The purpose of any easement or land reserved or dedicated to public use shall be designated, and the proposed use of sites other than residential shall be noted.
D. 
Block and lot numbers as approved by the Tax Assessor.
E. 
Minimum building setback line on all lot and other sites.
F. 
Location and description of all monuments.
G. 
Names of owners of adjoining unsubdivided land.
H. 
Certification by engineer or surveyor as to accuracy of details of plat.
I. 
Certification that the applicant is agent or owner of the land, or that the owner has given consent under an option agreement.
J. 
When approval of a plat is required by any officer or body of such a municipality, county or state, approval shall be certified on the plat.
K. 
Plans, profiles and cross sections of all grading, paving, curbs, sidewalks, storm and sanitary sewers and appurtenances, water mains, gas mains, street signs, bridges, shade trees, as built, approved by the Engineer, shall accompany the final plat.
L. 
Contours at one-foot intervals.
M. 
Certificate from Tax Collector that all taxes are paid to date.
[1]
Editor's Note: See N.J.S.A. 46:23-9.8 et seq.