A.
The municipality
shall inspect all phases of the installation of the best management
practices (BMPs) and/or stormwater management (SWM) facilities as
deemed appropriate by the municipality.
B.
During
any stage of the work, if the municipality determines that the BMPs
and/or stormwater management facilities are not being installed in
accordance with the approved SWM site plan, the municipality shall
revoke any existing permits or other approvals and issue a cease-and-desist
order until a revised SWM site plan is submitted and approved, as
specified in this chapter and until the deficiencies are corrected.
C.
An inspection
of all BMPs and/or stormwater management facilities may be conducted
by the municipality to confirm compliance with the approved SWM site
plan prior to the issuance of any occupancy permit.
A.
The applicant
and/or developer shall be responsible for providing as-built plans
of all SWM BMPs included in the approved SWM site plan. The as-built
plans and an explanation of any discrepancies with the construction
plans shall be submitted to the municipality.
B.
The as-built
submission shall include a certification of completion signed by a
qualified professional verifying that all permanent SWM BMPs have
been constructed according to the approved plans and specifications.
If any licensed qualified professionals contributed to the construction
plans, they must sign and seal the completion certificate.
C.
The applicant
and/or developer shall be responsible for providing the latitude and
longitude coordinates for all permanent SWM BMPs, at the central location
of each BMP.
D.
After
receipt of the completion certification by the municipality, the municipality
may conduct a final inspection.
